Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária
| Ano de defesa: | 2020 |
|---|---|
| Autor(a) principal: | |
| Orientador(a): | |
| Banca de defesa: | |
| Tipo de documento: | Tese |
| Tipo de acesso: | Acesso aberto |
| Idioma: | por |
| Instituição de defesa: |
Universidade Tecnológica Federal do Paraná
Curitiba Brasil Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial UTFPR |
| Programa de Pós-Graduação: |
Não Informado pela instituição
|
| Departamento: |
Não Informado pela instituição
|
| País: |
Não Informado pela instituição
|
| Palavras-chave em Português: | |
| Link de acesso: | http://repositorio.utfpr.edu.br/jspui/handle/1/23644 |
Resumo: | Introduction: Diabetes mellitus (DM) is the most common endocrine disease and is considered a worldwide epidemic. Among the complications of diabetes is the progressive loss of sensation in the lower limbs, especially in the feet. As a result of these complications, ulcers in insensitive feet can appear, which in many cases, due to the lack of a correct and early evaluation, evolve with serious injuries, contributing to the maintenance of diabetes as the main cause of non-traumatic lower limb amputations. Diabetes is also considered as an important contributing factor for delayed wound healing. Unfavorable developments can be prevented if there is early identification of the risky wound by calculating the wound area and the scar predictive factor. Equipment developed for measuring wounds is still incompatible with our reality, due to technical complexity and high costs. Objective: To facilitate the measurement of diabetic and non-diabetic wounds using a rule developed for this purpose and to establish reliable criteria for the assessment of scar progression. Method: Diabetic and non-diabetic individuals were recruited, who met the inclusion criteria, seeking to establish a comparative analysis between the results obtained by measurements between the 2D-FlexRuler ruler and traditional and computer aided metric modalities. Conclusion: The 2D-FlexRuler ruler is a reliable metric platform for obtaining the anatomical limits of wounds, through manual counting, in a simple way. Manual area estimation with 2D-FlexRuler is more accurate than traditional measurement methods. The use of the percentage rate of reduction of the wound area should be encouraged in the first consecutive weeks of treatment. 2D-FlexRuler allowed the predictive factor for healing to be achieved two weeks early, which contributes to the best therapeutic result and the lowest rate of complications, especially in diabetics. |
| id |
UTFPR-12_bd866a042274bdf893e1ea3e1f2312e1 |
|---|---|
| oai_identifier_str |
oai:repositorio.utfpr.edu.br:1/23644 |
| network_acronym_str |
UTFPR-12 |
| network_name_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository_id_str |
|
| spelling |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulneráriaComparative study between progression of diabetic and non-diabetic wounds using new technology of vulnerary evaluationDiabetesPés - ÚlcerasCicatrização de ferimentosFerimentos e lesões - MediçãoInstrumentos de medição - MedicinaMATLAB (Programa de computador)Modelos matemáticosSimulação (Computadores)Foot - UlcersWound healingWounds and injuries - MeasurementMeasuring instruments - MedicineMATLAB (Computer program)Mathematical modelsComputer simulationCNPQ::ENGENHARIAS::ENGENHARIA BIOMEDICA::ENGENHARIA MEDICA::INSTRUMENTACAO ODONTOLOGICA E MEDICO-HOSPITALAREngenharia ElétricaIntroduction: Diabetes mellitus (DM) is the most common endocrine disease and is considered a worldwide epidemic. Among the complications of diabetes is the progressive loss of sensation in the lower limbs, especially in the feet. As a result of these complications, ulcers in insensitive feet can appear, which in many cases, due to the lack of a correct and early evaluation, evolve with serious injuries, contributing to the maintenance of diabetes as the main cause of non-traumatic lower limb amputations. Diabetes is also considered as an important contributing factor for delayed wound healing. Unfavorable developments can be prevented if there is early identification of the risky wound by calculating the wound area and the scar predictive factor. Equipment developed for measuring wounds is still incompatible with our reality, due to technical complexity and high costs. Objective: To facilitate the measurement of diabetic and non-diabetic wounds using a rule developed for this purpose and to establish reliable criteria for the assessment of scar progression. Method: Diabetic and non-diabetic individuals were recruited, who met the inclusion criteria, seeking to establish a comparative analysis between the results obtained by measurements between the 2D-FlexRuler ruler and traditional and computer aided metric modalities. Conclusion: The 2D-FlexRuler ruler is a reliable metric platform for obtaining the anatomical limits of wounds, through manual counting, in a simple way. Manual area estimation with 2D-FlexRuler is more accurate than traditional measurement methods. The use of the percentage rate of reduction of the wound area should be encouraged in the first consecutive weeks of treatment. 2D-FlexRuler allowed the predictive factor for healing to be achieved two weeks early, which contributes to the best therapeutic result and the lowest rate of complications, especially in diabetics.Introdução: O Diabetes mellitus (DM) é a doença endócrina mais comum e é considerada uma epidemia mundial. Entre as complicações do diabetes está a perda progressiva da sensibilidade nos membros inferiores, principalmente nos pés. Em decorrência destas complicações, podem surgir ulcerações nos pés insensíveis, os quais em muitos casos, pela falta de uma avaliação correta e precoce, evoluem com graves lesões, contribuindo para a manutenção do diabetes como a principal causa de amputações não traumáticas dos membros inferiores. O diabetes também é considerado um importante fator de contribuição para o retardo na cicatrização de feridas. Evoluções desfavoráveis podem ser evitadas se houver a identificação precoce da ferida de risco através do cálculo da área da ferida e do fator preditivo cicatricial. Equipamentos desenvolvidos para mensuração de feridas são ainda incompatíveis com a nossa realidade, pela complexidade técnica e altos custos. Objetivo: Facilitar a medição de feridas de diabéticos e não diabéticos através de uma régua desenvolvida para esta finalidade e estabelecer critérios fidedignos de avaliação da progressão cicatricial. Método: Foram recrutados indivíduos diabéticos e não diabéticos, que preencheram os critérios de inclusão, buscando estabelecer uma análise comparativa entre os resultados obtidos pelas medições entre a régua 2DFlexRuler e modalidades métricas tradicionais e auxiliadas por computador. Conclusão: A régua 2D-FlexRuler é uma plataforma métrica confiável para a obtenção dos limites anatômicos de feridas, através da contagem manual, de forma simples. A estimativa manual da área com a 2D-FlexRuler é mais exata em relação aos métodos tradicionais de medição. O uso da taxa percentual de redução da área da ferida deve ser encorajado já nas primeiras semanas consecutivas de tratamento. A 2D-FlexRuler permitiu obter com precocidade de duas semanas o fator preditivo da cicatrização, o que contribui para o melhor resultado terapêutico e o menor índice de complicações, principalmente nos diabéticos.Universidade Tecnológica Federal do ParanáCuritibaBrasilPrograma de Pós-Graduação em Engenharia Elétrica e Informática IndustrialUTFPRSchneider Junior, Bertoldohttps://orcid.org/0000-0002-7240-9652http://lattes.cnpq.br/3675060302477169Schneider, Fabio Kurthttps://orcid.org/0000-0001-6916-1361http://lattes.cnpq.br/1463591813823167Schneider Junior, Bertoldohttps://orcid.org/0000-0002-7240-9652http://lattes.cnpq.br/3675060302477169Dias Junior, Eltonhttps://orcid.org/0000-0001-8392-7933http://lattes.cnpq.br/8408587485005149Borba, Gustavo Benvenuttihttps://orcid.org/0000-0001-7412-2412http://lattes.cnpq.br/2591233508037006Ribas Filho, Jurandir Marcondeshttps://orcid.org/0000-0002-5251-7672http://lattes.cnpq.br/7077398001188294Faria, Rubens Alexandre dehttps://orcid.org/0000-0002-0010-899Xhttp://lattes.cnpq.br/3343221563536802Mehl, Adriano Antonio2020-12-30T20:55:24Z2020-12-30T20:55:24Z2020-09-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfMEHL, Adriano Antonio. Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária. 2020. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) - Universidade Tecnológica Federal do Paraná, Curitiba, 2020.http://repositorio.utfpr.edu.br/jspui/handle/1/23644porhttp://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2020-12-31T06:10:33Zoai:repositorio.utfpr.edu.br:1/23644Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2020-12-31T06:10:33Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false |
| dc.title.none.fl_str_mv |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária Comparative study between progression of diabetic and non-diabetic wounds using new technology of vulnerary evaluation |
| title |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária |
| spellingShingle |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária Mehl, Adriano Antonio Diabetes Pés - Úlceras Cicatrização de ferimentos Ferimentos e lesões - Medição Instrumentos de medição - Medicina MATLAB (Programa de computador) Modelos matemáticos Simulação (Computadores) Foot - Ulcers Wound healing Wounds and injuries - Measurement Measuring instruments - Medicine MATLAB (Computer program) Mathematical models Computer simulation CNPQ::ENGENHARIAS::ENGENHARIA BIOMEDICA::ENGENHARIA MEDICA::INSTRUMENTACAO ODONTOLOGICA E MEDICO-HOSPITALAR Engenharia Elétrica |
| title_short |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária |
| title_full |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária |
| title_fullStr |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária |
| title_full_unstemmed |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária |
| title_sort |
Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária |
| author |
Mehl, Adriano Antonio |
| author_facet |
Mehl, Adriano Antonio |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Schneider Junior, Bertoldo https://orcid.org/0000-0002-7240-9652 http://lattes.cnpq.br/3675060302477169 Schneider, Fabio Kurt https://orcid.org/0000-0001-6916-1361 http://lattes.cnpq.br/1463591813823167 Schneider Junior, Bertoldo https://orcid.org/0000-0002-7240-9652 http://lattes.cnpq.br/3675060302477169 Dias Junior, Elton https://orcid.org/0000-0001-8392-7933 http://lattes.cnpq.br/8408587485005149 Borba, Gustavo Benvenutti https://orcid.org/0000-0001-7412-2412 http://lattes.cnpq.br/2591233508037006 Ribas Filho, Jurandir Marcondes https://orcid.org/0000-0002-5251-7672 http://lattes.cnpq.br/7077398001188294 Faria, Rubens Alexandre de https://orcid.org/0000-0002-0010-899X http://lattes.cnpq.br/3343221563536802 |
| dc.contributor.author.fl_str_mv |
Mehl, Adriano Antonio |
| dc.subject.por.fl_str_mv |
Diabetes Pés - Úlceras Cicatrização de ferimentos Ferimentos e lesões - Medição Instrumentos de medição - Medicina MATLAB (Programa de computador) Modelos matemáticos Simulação (Computadores) Foot - Ulcers Wound healing Wounds and injuries - Measurement Measuring instruments - Medicine MATLAB (Computer program) Mathematical models Computer simulation CNPQ::ENGENHARIAS::ENGENHARIA BIOMEDICA::ENGENHARIA MEDICA::INSTRUMENTACAO ODONTOLOGICA E MEDICO-HOSPITALAR Engenharia Elétrica |
| topic |
Diabetes Pés - Úlceras Cicatrização de ferimentos Ferimentos e lesões - Medição Instrumentos de medição - Medicina MATLAB (Programa de computador) Modelos matemáticos Simulação (Computadores) Foot - Ulcers Wound healing Wounds and injuries - Measurement Measuring instruments - Medicine MATLAB (Computer program) Mathematical models Computer simulation CNPQ::ENGENHARIAS::ENGENHARIA BIOMEDICA::ENGENHARIA MEDICA::INSTRUMENTACAO ODONTOLOGICA E MEDICO-HOSPITALAR Engenharia Elétrica |
| description |
Introduction: Diabetes mellitus (DM) is the most common endocrine disease and is considered a worldwide epidemic. Among the complications of diabetes is the progressive loss of sensation in the lower limbs, especially in the feet. As a result of these complications, ulcers in insensitive feet can appear, which in many cases, due to the lack of a correct and early evaluation, evolve with serious injuries, contributing to the maintenance of diabetes as the main cause of non-traumatic lower limb amputations. Diabetes is also considered as an important contributing factor for delayed wound healing. Unfavorable developments can be prevented if there is early identification of the risky wound by calculating the wound area and the scar predictive factor. Equipment developed for measuring wounds is still incompatible with our reality, due to technical complexity and high costs. Objective: To facilitate the measurement of diabetic and non-diabetic wounds using a rule developed for this purpose and to establish reliable criteria for the assessment of scar progression. Method: Diabetic and non-diabetic individuals were recruited, who met the inclusion criteria, seeking to establish a comparative analysis between the results obtained by measurements between the 2D-FlexRuler ruler and traditional and computer aided metric modalities. Conclusion: The 2D-FlexRuler ruler is a reliable metric platform for obtaining the anatomical limits of wounds, through manual counting, in a simple way. Manual area estimation with 2D-FlexRuler is more accurate than traditional measurement methods. The use of the percentage rate of reduction of the wound area should be encouraged in the first consecutive weeks of treatment. 2D-FlexRuler allowed the predictive factor for healing to be achieved two weeks early, which contributes to the best therapeutic result and the lowest rate of complications, especially in diabetics. |
| publishDate |
2020 |
| dc.date.none.fl_str_mv |
2020-12-30T20:55:24Z 2020-12-30T20:55:24Z 2020-09-01 |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
| format |
doctoralThesis |
| status_str |
publishedVersion |
| dc.identifier.uri.fl_str_mv |
MEHL, Adriano Antonio. Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária. 2020. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) - Universidade Tecnológica Federal do Paraná, Curitiba, 2020. http://repositorio.utfpr.edu.br/jspui/handle/1/23644 |
| identifier_str_mv |
MEHL, Adriano Antonio. Estudo comparativo entre progressão de feridas de diabéticos e não diabéticos utilizando nova tecnologia de avaliação vulnerária. 2020. Tese (Doutorado em Engenharia Elétrica e Informática Industrial) - Universidade Tecnológica Federal do Paraná, Curitiba, 2020. |
| url |
http://repositorio.utfpr.edu.br/jspui/handle/1/23644 |
| dc.language.iso.fl_str_mv |
por |
| language |
por |
| dc.rights.driver.fl_str_mv |
http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess |
| rights_invalid_str_mv |
http://creativecommons.org/licenses/by/4.0/ |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
application/pdf |
| dc.publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Curitiba Brasil Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial UTFPR |
| publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Curitiba Brasil Programa de Pós-Graduação em Engenharia Elétrica e Informática Industrial UTFPR |
| dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) instname:Universidade Tecnológica Federal do Paraná (UTFPR) instacron:UTFPR |
| instname_str |
Universidade Tecnológica Federal do Paraná (UTFPR) |
| instacron_str |
UTFPR |
| institution |
UTFPR |
| reponame_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| collection |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository.name.fl_str_mv |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR) |
| repository.mail.fl_str_mv |
riut@utfpr.edu.br || sibi@utfpr.edu.br |
| _version_ |
1850498309155717120 |