Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos

Detalhes bibliográficos
Ano de defesa: 2015
Autor(a) principal: Broday, Evandro Eduardo
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Tese
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Ponta Grossa
Brasil
Programa de Pós-Graduação em Engenharia de Produção
UTFPR
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/1952
Resumo: The PMV (Predicted Mean Vote) is an index which aims to predict the thermal sensation of people exposed to the same environment. However, there are discrepancies between the PMV model and thermal sensation responses obtained in field studies for some populations. One of the components for the calculation of PMV is the clothing insulation (Icl), which uses the clothing surface temperature (tcl), which can be a factor which contributes towards these discrepancies. Therefore, the aim of this research was to show the tcl influence on the PMV index. Thus, this research aimed to present a new thermal prediction model minimizing inaccuracies of thermal exchanges through the correct determination of tcl, by using Newton's method. Data collection featured a group of welders, a group of office workers performing sedentary activities and a group of Portuguese Army Military. Having collected environmental and personal variables in Brazil and Portugal, this research developed the Snew1, through a value of tcl without residues generated by Newton’s Method and replaced in convection and radiation heat loss equations and Snew2, through multiple regression between thermal sensation votes collected in field study, the metabolic rate and the mechanisms of heat exchange. After confrontation between the real thermal sensation and the calculated PMV values, for all groups, the results found with the Snew1 and Snew2 were always better than the results found with the Fanger’s Original PMV. The best result obtained in this research was with the military group, where the Snew2 presented an improvement about 46% over the original PMV. This search proved that the clothing surface temperature is a variable that influences the PMV model and minimizing inaccuracies in its obtaining decreases discrepancies between thermal sensation votes and PMV.
id UTFPR-12_c4d96b6598b19787682a7e254b717168
oai_identifier_str oai:repositorio.utfpr.edu.br:1/1952
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internosA methodological proposal of predicted mean vote for people in closed environmentsErgonomiaConforto humanoVestuário adequado ao ambiente de trabalhoTemperatura corporalHuman engineeringHuman comfortDress codes in the workplaceBody temperatureCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOThe PMV (Predicted Mean Vote) is an index which aims to predict the thermal sensation of people exposed to the same environment. However, there are discrepancies between the PMV model and thermal sensation responses obtained in field studies for some populations. One of the components for the calculation of PMV is the clothing insulation (Icl), which uses the clothing surface temperature (tcl), which can be a factor which contributes towards these discrepancies. Therefore, the aim of this research was to show the tcl influence on the PMV index. Thus, this research aimed to present a new thermal prediction model minimizing inaccuracies of thermal exchanges through the correct determination of tcl, by using Newton's method. Data collection featured a group of welders, a group of office workers performing sedentary activities and a group of Portuguese Army Military. Having collected environmental and personal variables in Brazil and Portugal, this research developed the Snew1, through a value of tcl without residues generated by Newton’s Method and replaced in convection and radiation heat loss equations and Snew2, through multiple regression between thermal sensation votes collected in field study, the metabolic rate and the mechanisms of heat exchange. After confrontation between the real thermal sensation and the calculated PMV values, for all groups, the results found with the Snew1 and Snew2 were always better than the results found with the Fanger’s Original PMV. The best result obtained in this research was with the military group, where the Snew2 presented an improvement about 46% over the original PMV. This search proved that the clothing surface temperature is a variable that influences the PMV model and minimizing inaccuracies in its obtaining decreases discrepancies between thermal sensation votes and PMV.CNPqO PMV (Voto Médio Estimado) é um índice que pretende prever a sensação térmica das pessoas expostas a um mesmo ambiente. Entretanto, existem discrepâncias entre o modelo do PMV e as respostas de sensação térmica obtidas em estudos de campo efetuados para algumas populações. Um dos componentes para o cálculo do PMV é o isolamento térmico das vestimentas (Icl), que se utiliza da temperatura de superfície da vestimenta (tcl), que pode ser um fator que contribui para estas discrepâncias. Assim, esta pesquisa teve como objetivo apresentar um novo modelo de predição térmica minimizando as imprecisões das trocas térmicas pela correta determinação do tcl, utilizando-se do método de Newton. A coleta de dados contou com um grupo de soldadores, um grupo de trabalhadores de escritório desempenhando atividades sedentárias e um grupo de militares do exército português. Com a coleta de variáveis ambientais e pessoais no Brasil e em Portugal, esta pesquisa desenvolveu o Snovo1, por meio de um valor de tcl sem resíduos gerado pelo método de Newton e substituído nas parcelas de convecção e radiação de perda de calor e o Snovo2, mediante regressão múltipla entre os votos de sensação térmica coletados em estudo de campo, a taxa metabólica e os mecanismos de troca de calor. Depois do confronto entre a sensação térmica real e os valores de PMV calculados, para todos os grupos, os resultados encontrados com o Snovo1 e Snovo2 sempre foram melhores que os resultados encontrados com o PMV original de Fanger. O melhor resultado obtido nesta pesquisa foi com o grupo de militares, onde o Snovo2 apresentou uma melhoria de aproximadamente 46% em relação ao PMV original. Esta pesquisa comprovou que a temperatura superficial da vestimenta é uma variável de influência no modelo do PMV e minimizar imprecisões em sua obtenção diminui as discrepâncias entre os votos de sensação térmica e o PMV.Universidade Tecnológica Federal do ParanáPonta GrossaBrasilPrograma de Pós-Graduação em Engenharia de ProduçãoUTFPRXavier, Antonio Augusto de Paulahttp://lattes.cnpq.br/1328761093168892Westphal, Fernando SimonHatakeyama, KazuoBraghini Junior, AldoAlves, Thiago AntoniniBroday, Evandro Eduardo2017-01-27T18:34:22Z2017-01-27T18:34:22Z2015-10-01info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfBRODAY, Evandro Eduardo. Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos. 2015. 159 f. Tese (Doutorado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.http://repositorio.utfpr.edu.br/jspui/handle/1/1952porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2017-01-28T05:01:11Zoai:repositorio.utfpr.edu.br:1/1952Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2017-01-28T05:01:11Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
A methodological proposal of predicted mean vote for people in closed environments
title Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
spellingShingle Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
Broday, Evandro Eduardo
Ergonomia
Conforto humano
Vestuário adequado ao ambiente de trabalho
Temperatura corporal
Human engineering
Human comfort
Dress codes in the workplace
Body temperature
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
title_short Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
title_full Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
title_fullStr Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
title_full_unstemmed Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
title_sort Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos
author Broday, Evandro Eduardo
author_facet Broday, Evandro Eduardo
author_role author
dc.contributor.none.fl_str_mv Xavier, Antonio Augusto de Paula
http://lattes.cnpq.br/1328761093168892
Westphal, Fernando Simon
Hatakeyama, Kazuo
Braghini Junior, Aldo
Alves, Thiago Antonini
dc.contributor.author.fl_str_mv Broday, Evandro Eduardo
dc.subject.por.fl_str_mv Ergonomia
Conforto humano
Vestuário adequado ao ambiente de trabalho
Temperatura corporal
Human engineering
Human comfort
Dress codes in the workplace
Body temperature
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
topic Ergonomia
Conforto humano
Vestuário adequado ao ambiente de trabalho
Temperatura corporal
Human engineering
Human comfort
Dress codes in the workplace
Body temperature
CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO
description The PMV (Predicted Mean Vote) is an index which aims to predict the thermal sensation of people exposed to the same environment. However, there are discrepancies between the PMV model and thermal sensation responses obtained in field studies for some populations. One of the components for the calculation of PMV is the clothing insulation (Icl), which uses the clothing surface temperature (tcl), which can be a factor which contributes towards these discrepancies. Therefore, the aim of this research was to show the tcl influence on the PMV index. Thus, this research aimed to present a new thermal prediction model minimizing inaccuracies of thermal exchanges through the correct determination of tcl, by using Newton's method. Data collection featured a group of welders, a group of office workers performing sedentary activities and a group of Portuguese Army Military. Having collected environmental and personal variables in Brazil and Portugal, this research developed the Snew1, through a value of tcl without residues generated by Newton’s Method and replaced in convection and radiation heat loss equations and Snew2, through multiple regression between thermal sensation votes collected in field study, the metabolic rate and the mechanisms of heat exchange. After confrontation between the real thermal sensation and the calculated PMV values, for all groups, the results found with the Snew1 and Snew2 were always better than the results found with the Fanger’s Original PMV. The best result obtained in this research was with the military group, where the Snew2 presented an improvement about 46% over the original PMV. This search proved that the clothing surface temperature is a variable that influences the PMV model and minimizing inaccuracies in its obtaining decreases discrepancies between thermal sensation votes and PMV.
publishDate 2015
dc.date.none.fl_str_mv 2015-10-01
2017-01-27T18:34:22Z
2017-01-27T18:34:22Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/doctoralThesis
format doctoralThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv BRODAY, Evandro Eduardo. Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos. 2015. 159 f. Tese (Doutorado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.
http://repositorio.utfpr.edu.br/jspui/handle/1/1952
identifier_str_mv BRODAY, Evandro Eduardo. Proposta de metodologia de predição de sensação térmica dos usuários em ambientes internos. 2015. 159 f. Tese (Doutorado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.
url http://repositorio.utfpr.edu.br/jspui/handle/1/1952
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Ponta Grossa
Brasil
Programa de Pós-Graduação em Engenharia de Produção
UTFPR
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Ponta Grossa
Brasil
Programa de Pós-Graduação em Engenharia de Produção
UTFPR
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498267268251648