Avaliação comparativa entre processos de secagem na produção de tomate em pó

Detalhes bibliográficos
Ano de defesa: 2014
Autor(a) principal: Jorge, Aline
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Ponta Grossa
Programa de Pós-Graduação em Engenharia de Produção
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/1571
Resumo: The general objective of this research was to achieve a comparative study among three drying processes applied to tomato dehydration, being two already usual in industrial processes and one is an innovatied on fruit and vegtables drying. For that was developed and tested a laboratory prototype of the hot air drying system and were defined the parameters and drying conditions for each drying system used for this study. The research developed in stages of: definition of the drying parameters, obtention of tomato powder and characterization of the tomato powder. Calculaitons performedtodetermine the energy consumption and operation costs for each system. The raw material used was characterized and the tomato powders obtained by each drying treatment performed. The determinations realized for the raw material and product obtained were moisture, ash, protein, fat, acidity, pH, water activity, total phenolic compounds, carotenes in fractios of β-carotene and lycopene, ascorbic acid and colour. According to the results was proven that the hot air drying, proposen as an innovativem, is able to dehydrate the tomatoes on the same way as the other with a reduced of time process, wich results in a significant reducing of costs and energy consumption, leading to productivity increase. Evaluating the centesimal composition was observed that de hot air drying system promoted minor degradation of the nutrients in tomato powder, highlighting the minor degradation of proteins, minor reducing of pH, major concentration of acidity ( in terms of citric acid), also presented de major increase on the concentration of the carotenes, both for β-carotene and lycopene.The lyofilization maintained the charcteristics of composition in the final product, although, showed the disadvantage of a high cost of the process, being largely highter than the others, did not present a good colour and did not reveal the increase on the concentration of the carotenes.The oven drying promoted the dehydration in a slightly longer time than the hot air flow; however, was the method that showed the major degradation on the final product obtained from all drying methods.
id UTFPR-12_ec3d53e660eed289345d44c8147546d9
oai_identifier_str oai:repositorio.utfpr.edu.br:1/1571
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Avaliação comparativa entre processos de secagem na produção de tomate em póControle de processoInovações tecnológicasSecagemTomateProcess controlTechnological innovationsDryingTomatoesThe general objective of this research was to achieve a comparative study among three drying processes applied to tomato dehydration, being two already usual in industrial processes and one is an innovatied on fruit and vegtables drying. For that was developed and tested a laboratory prototype of the hot air drying system and were defined the parameters and drying conditions for each drying system used for this study. The research developed in stages of: definition of the drying parameters, obtention of tomato powder and characterization of the tomato powder. Calculaitons performedtodetermine the energy consumption and operation costs for each system. The raw material used was characterized and the tomato powders obtained by each drying treatment performed. The determinations realized for the raw material and product obtained were moisture, ash, protein, fat, acidity, pH, water activity, total phenolic compounds, carotenes in fractios of β-carotene and lycopene, ascorbic acid and colour. According to the results was proven that the hot air drying, proposen as an innovativem, is able to dehydrate the tomatoes on the same way as the other with a reduced of time process, wich results in a significant reducing of costs and energy consumption, leading to productivity increase. Evaluating the centesimal composition was observed that de hot air drying system promoted minor degradation of the nutrients in tomato powder, highlighting the minor degradation of proteins, minor reducing of pH, major concentration of acidity ( in terms of citric acid), also presented de major increase on the concentration of the carotenes, both for β-carotene and lycopene.The lyofilization maintained the charcteristics of composition in the final product, although, showed the disadvantage of a high cost of the process, being largely highter than the others, did not present a good colour and did not reveal the increase on the concentration of the carotenes.The oven drying promoted the dehydration in a slightly longer time than the hot air flow; however, was the method that showed the major degradation on the final product obtained from all drying methods.O objetivo geral deste trabalho foi realizar um estudo comparativo entre três processos de secagem aplicados para desidratação de tomates, dois já usuais na indústria, a estufa com circulação de ar e liofilização, e um inovador na secagem de frutas e hortaliças. Para isso foi desenvolvido e testado um protótipo laboratorial do sistema de secagem por fluxo de ar e foram definidos os parâmetros das condições de secagem para cada um dos sistemas utilizados no estudo. A pesquisa de desenvolveu nas etapas: definição dos parâmetros de secagem, obtenção e caracterização do pó de tomate. Foram feitos cálculos para determinação do consumo energético e dos custos de operação para cada um dos sistemas. Caracterizou-se a matéria prima utilizada e os pós de tomate obtidos por meio de cada um dos tratamentos com relação a: umidade, cinzas, proteínas, lipídios, acidez, pH, atividade de água, compostos fenólicos totais, carotenoides em frações de β-caroteno e licopeno, ácido ascórbico e cor. De acordo com os resultados, foi comprovado que o sistema de secagem por fluxo de ar, proposto como inovador, consegue desidratar o tomate com tempo reduzido de processo, resultando em significativa redução de custo e consumo energético, com aumento da produtividade. Avaliando a composição centesimal observou-se que o sistema de secagem por fluxo de ar foi o processo de secagem com menor degradação dos nutrientes no pó de tomate, com destaque em proteínas, menor redução do pH, maior concentração de acidez (em termos de ácido cítrico) e também apresentou o maior aumento da concentração dos carotenoides, tanto de β-caroteno como de licopeno. Já, a liofilização manteve as características da composição do produto final, entretanto com desvantagem do custo do processo, superior aos demais, sem boa característica de cor e sem aumento na concentração de carotenoides. A secagem em estufa aconteceu em tempo pouco maior do que o sistema de secagem por fluxo de ar e apresentou maior degradação no produto final obtido.Universidade Tecnológica Federal do ParanáPonta GrossaPrograma de Pós-Graduação em Engenharia de ProduçãoTebcherani, Sergio MazurekAlmeida, Denise MilléoJorge, Aline2016-02-23T21:58:28Z2016-02-23T21:58:28Z2014-02-21info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfJORGE, Aline. Avaliação comparativa entre processos de secagem na produção de tomate em pó. 2014. 68 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2014.http://repositorio.utfpr.edu.br/jspui/handle/1/1571porreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPRinfo:eu-repo/semantics/openAccess2016-02-24T06:00:29Zoai:repositorio.utfpr.edu.br:1/1571Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2016-02-24T06:00:29Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Avaliação comparativa entre processos de secagem na produção de tomate em pó
title Avaliação comparativa entre processos de secagem na produção de tomate em pó
spellingShingle Avaliação comparativa entre processos de secagem na produção de tomate em pó
Jorge, Aline
Controle de processo
Inovações tecnológicas
Secagem
Tomate
Process control
Technological innovations
Drying
Tomatoes
title_short Avaliação comparativa entre processos de secagem na produção de tomate em pó
title_full Avaliação comparativa entre processos de secagem na produção de tomate em pó
title_fullStr Avaliação comparativa entre processos de secagem na produção de tomate em pó
title_full_unstemmed Avaliação comparativa entre processos de secagem na produção de tomate em pó
title_sort Avaliação comparativa entre processos de secagem na produção de tomate em pó
author Jorge, Aline
author_facet Jorge, Aline
author_role author
dc.contributor.none.fl_str_mv Tebcherani, Sergio Mazurek
Almeida, Denise Milléo
dc.contributor.author.fl_str_mv Jorge, Aline
dc.subject.por.fl_str_mv Controle de processo
Inovações tecnológicas
Secagem
Tomate
Process control
Technological innovations
Drying
Tomatoes
topic Controle de processo
Inovações tecnológicas
Secagem
Tomate
Process control
Technological innovations
Drying
Tomatoes
description The general objective of this research was to achieve a comparative study among three drying processes applied to tomato dehydration, being two already usual in industrial processes and one is an innovatied on fruit and vegtables drying. For that was developed and tested a laboratory prototype of the hot air drying system and were defined the parameters and drying conditions for each drying system used for this study. The research developed in stages of: definition of the drying parameters, obtention of tomato powder and characterization of the tomato powder. Calculaitons performedtodetermine the energy consumption and operation costs for each system. The raw material used was characterized and the tomato powders obtained by each drying treatment performed. The determinations realized for the raw material and product obtained were moisture, ash, protein, fat, acidity, pH, water activity, total phenolic compounds, carotenes in fractios of β-carotene and lycopene, ascorbic acid and colour. According to the results was proven that the hot air drying, proposen as an innovativem, is able to dehydrate the tomatoes on the same way as the other with a reduced of time process, wich results in a significant reducing of costs and energy consumption, leading to productivity increase. Evaluating the centesimal composition was observed that de hot air drying system promoted minor degradation of the nutrients in tomato powder, highlighting the minor degradation of proteins, minor reducing of pH, major concentration of acidity ( in terms of citric acid), also presented de major increase on the concentration of the carotenes, both for β-carotene and lycopene.The lyofilization maintained the charcteristics of composition in the final product, although, showed the disadvantage of a high cost of the process, being largely highter than the others, did not present a good colour and did not reveal the increase on the concentration of the carotenes.The oven drying promoted the dehydration in a slightly longer time than the hot air flow; however, was the method that showed the major degradation on the final product obtained from all drying methods.
publishDate 2014
dc.date.none.fl_str_mv 2014-02-21
2016-02-23T21:58:28Z
2016-02-23T21:58:28Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv JORGE, Aline. Avaliação comparativa entre processos de secagem na produção de tomate em pó. 2014. 68 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2014.
http://repositorio.utfpr.edu.br/jspui/handle/1/1571
identifier_str_mv JORGE, Aline. Avaliação comparativa entre processos de secagem na produção de tomate em pó. 2014. 68 f. Dissertação (Mestrado em Engenharia de Produção) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2014.
url http://repositorio.utfpr.edu.br/jspui/handle/1/1571
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Ponta Grossa
Programa de Pós-Graduação em Engenharia de Produção
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Ponta Grossa
Programa de Pós-Graduação em Engenharia de Produção
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498333001383936