Exportação concluída — 

Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte

Detalhes bibliográficos
Ano de defesa: 2022
Autor(a) principal: Xavier, Milton Mariano
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Curitiba
Brasil
Programa de Pós-Graduação em Sistemas de Energia
UTFPR
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/30061
Resumo: In the present work, an isolated SEPIC three-phase rectifier operating in DCM is proposed for small wind turbine applications. The proposed topology is attractive because of the low number of controlled semiconductors and, the fact that it operates in DCM, allows to obtain input currents with low THD, with a fixed duty cycle and without the use of current sensors. A study of steady-state operation is presented, which aims to find equations that allow the design of the components that make up the system. Additionally, control-oriented modeling is performed, where it is shown that only the output voltage control is needed. Finally, a 1kW prototype was built and tested with a conversion of 96 VCA to 400 VCC, where the experimental results obtained attest to the feasibility of the proposal for low power applications in wind turbines.
id UTFPR-12_f72dffe80438be50f451f70e423ea35b
oai_identifier_str oai:repositorio.utfpr.edu.br:1/30061
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porteThree-phase isolated SEPIC-DCM rectifier for application in small wind turbinesRetificadores de corrente elétricaFator de potênciaTurbinasConversores de corrente elétricaCondução elétricaSimulação (Computadores)Electric current rectifiersElectric power factorTurbinesElectric current convertersElectric drivingComputer simulationCNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIACNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS::AUTOMACAO ELETRONICA DE PROCESSOS ELETRICOS E INDUSTRIAISEngenharia ElétricaIn the present work, an isolated SEPIC three-phase rectifier operating in DCM is proposed for small wind turbine applications. The proposed topology is attractive because of the low number of controlled semiconductors and, the fact that it operates in DCM, allows to obtain input currents with low THD, with a fixed duty cycle and without the use of current sensors. A study of steady-state operation is presented, which aims to find equations that allow the design of the components that make up the system. Additionally, control-oriented modeling is performed, where it is shown that only the output voltage control is needed. Finally, a 1kW prototype was built and tested with a conversion of 96 VCA to 400 VCC, where the experimental results obtained attest to the feasibility of the proposal for low power applications in wind turbines.No presente trabalho é proposto um retificador trifásico SEPIC isolado operando em DCM voltado para aplicações de aerogeradores de pequeno porte. A topologia proposta tem como atrativo o baixo número de semicondutores controlados e o fato de operar em DCM, permite que se obtenham correntes de entrada com baixa THD, com uma razão cíclica fixa e sem o uso de sensores de corrente. É apresentado um estudo da operação em regime permanente, onde tem por objetivo encontrar equações que permitam o projeto dos componentes que compõem o sistema. Adicionalmente é feita a modelagem orientada ao controle, onde é mostrado que é necessário apenas o controle de tensão de saída. Por fim, foi construído e testado um protótipo de 1kW com uma conversão de 96 VCA para 400 VCC, onde os resultados experimentais obtidos atestam a viabilidade da proposta para aplicações de baixa potência em aerogeradores.Universidade Tecnológica Federal do ParanáCuritibaBrasilPrograma de Pós-Graduação em Sistemas de EnergiaUTFPRCortez, Daniel Floreshttps://orcid.org/0000-0002-1650-0988http://lattes.cnpq.br/5050752890498527Romaneli, Eduardo Félix Ribeirohttps://orcid.org/0000-0003-0592-5195http://lattes.cnpq.br/1223078719595762Cortez, Daniel Floreshttps://orcid.org/0000-0002-1650-0988http://lattes.cnpq.br/5050752890498527Gules, Rogerhttps://orcid.org/0000-0002-4037-9444http://lattes.cnpq.br/8115378687801645Lazzarin, Telles Brunellihttps://orcid.org/0000-0001-8598-8641http://lattes.cnpq.br/2513940350875541Xavier, Milton Mariano2022-11-09T21:11:00Z2022-11-09T21:11:00Z2022-08-31info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfXAVIER, Milton Mariano. Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte. 2022. Dissertação (Mestrado em Sistemas de Energia) - Universidade Tecnológica Federal do Paraná, Curitiba, 2022.http://repositorio.utfpr.edu.br/jspui/handle/1/30061porhttp://creativecommons.org/licenses/by-nc-sa/4.0/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2022-11-10T06:07:28Zoai:repositorio.utfpr.edu.br:1/30061Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2022-11-10T06:07:28Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
Three-phase isolated SEPIC-DCM rectifier for application in small wind turbines
title Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
spellingShingle Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
Xavier, Milton Mariano
Retificadores de corrente elétrica
Fator de potência
Turbinas
Conversores de corrente elétrica
Condução elétrica
Simulação (Computadores)
Electric current rectifiers
Electric power factor
Turbines
Electric current converters
Electric driving
Computer simulation
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS::AUTOMACAO ELETRONICA DE PROCESSOS ELETRICOS E INDUSTRIAIS
Engenharia Elétrica
title_short Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
title_full Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
title_fullStr Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
title_full_unstemmed Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
title_sort Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte
author Xavier, Milton Mariano
author_facet Xavier, Milton Mariano
author_role author
dc.contributor.none.fl_str_mv Cortez, Daniel Flores
https://orcid.org/0000-0002-1650-0988
http://lattes.cnpq.br/5050752890498527
Romaneli, Eduardo Félix Ribeiro
https://orcid.org/0000-0003-0592-5195
http://lattes.cnpq.br/1223078719595762
Cortez, Daniel Flores
https://orcid.org/0000-0002-1650-0988
http://lattes.cnpq.br/5050752890498527
Gules, Roger
https://orcid.org/0000-0002-4037-9444
http://lattes.cnpq.br/8115378687801645
Lazzarin, Telles Brunelli
https://orcid.org/0000-0001-8598-8641
http://lattes.cnpq.br/2513940350875541
dc.contributor.author.fl_str_mv Xavier, Milton Mariano
dc.subject.por.fl_str_mv Retificadores de corrente elétrica
Fator de potência
Turbinas
Conversores de corrente elétrica
Condução elétrica
Simulação (Computadores)
Electric current rectifiers
Electric power factor
Turbines
Electric current converters
Electric driving
Computer simulation
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS::AUTOMACAO ELETRONICA DE PROCESSOS ELETRICOS E INDUSTRIAIS
Engenharia Elétrica
topic Retificadores de corrente elétrica
Fator de potência
Turbinas
Conversores de corrente elétrica
Condução elétrica
Simulação (Computadores)
Electric current rectifiers
Electric power factor
Turbines
Electric current converters
Electric driving
Computer simulation
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::SISTEMAS ELETRICOS DE POTENCIA
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA::ELETRONICA INDUSTRIAL, SISTEMAS E CONTROLES ELETRONICOS::AUTOMACAO ELETRONICA DE PROCESSOS ELETRICOS E INDUSTRIAIS
Engenharia Elétrica
description In the present work, an isolated SEPIC three-phase rectifier operating in DCM is proposed for small wind turbine applications. The proposed topology is attractive because of the low number of controlled semiconductors and, the fact that it operates in DCM, allows to obtain input currents with low THD, with a fixed duty cycle and without the use of current sensors. A study of steady-state operation is presented, which aims to find equations that allow the design of the components that make up the system. Additionally, control-oriented modeling is performed, where it is shown that only the output voltage control is needed. Finally, a 1kW prototype was built and tested with a conversion of 96 VCA to 400 VCC, where the experimental results obtained attest to the feasibility of the proposal for low power applications in wind turbines.
publishDate 2022
dc.date.none.fl_str_mv 2022-11-09T21:11:00Z
2022-11-09T21:11:00Z
2022-08-31
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv XAVIER, Milton Mariano. Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte. 2022. Dissertação (Mestrado em Sistemas de Energia) - Universidade Tecnológica Federal do Paraná, Curitiba, 2022.
http://repositorio.utfpr.edu.br/jspui/handle/1/30061
identifier_str_mv XAVIER, Milton Mariano. Retificador SEPIC trifásico isolado operando em DCM para aplicação em aerogeradores de pequeno porte. 2022. Dissertação (Mestrado em Sistemas de Energia) - Universidade Tecnológica Federal do Paraná, Curitiba, 2022.
url http://repositorio.utfpr.edu.br/jspui/handle/1/30061
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv http://creativecommons.org/licenses/by-nc-sa/4.0/
info:eu-repo/semantics/openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-sa/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Brasil
Programa de Pós-Graduação em Sistemas de Energia
UTFPR
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Brasil
Programa de Pós-Graduação em Sistemas de Energia
UTFPR
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498311177371648