DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA
Ano de defesa: | 2008 |
---|---|
Autor(a) principal: | |
Orientador(a): | |
Banca de defesa: | , |
Tipo de documento: | Dissertação |
Tipo de acesso: | Acesso aberto |
Idioma: | por |
Instituição de defesa: |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA
|
Programa de Pós-Graduação: |
Programa de Pós-Graduação em Engenharia e Ciências de Materiais
|
Departamento: |
Desenvolvimento e Caracterização de Materiais
|
País: |
BR
|
Palavras-chave em Português: | |
Área do conhecimento CNPq: | |
Link de acesso: | http://tede2.uepg.br/jspui/handle/prefix/1389 |
Resumo: | In this work has been developed a new way to impregnate using high pressure. Thin film were obtained in soda-lime glass surface when it were used Co3O4, Al2O3, TiO2 and SnO2 as a oxides deposited, across a furnace confectioned for this experiment. SnO2 was results of two different chemical methods of synthesis. It was able to control tree variable: temperature, time and final pressure of test from an initial pressure of dry synthetic air. Results were characterized by X-ray diffraction, X-ray fluorescence of the powder and film morphology was analyzed by scan electronic microscopy. Using nanoindentation with Berkovich tip the mechanical properties were determined of the films produced, calculating the Young Modulus and hardness, and using Vickers indentation was possible to calculate the fracture toughness. Experimental process results to different oxides were compared among them and it were able to verify the viability of this new way to product a thin film. |
id |
UEPG_4af316d02b3c3c8061982325f4f5afb1 |
---|---|
oai_identifier_str |
oai:tede2.uepg.br:prefix/1389 |
network_acronym_str |
UEPG |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
repository_id_str |
|
spelling |
Tebcherani, Sérgio MazurekCPF:53106090949http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4798869J5Michel, Milton DomingosCPF:55392199968http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4709471J8Varela, José AranaCPF:04111508804http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4709471J8Chinelatto, Adriana Scoton AntônioCPF:13967937801http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721108U7CPF:66754879068Sequinel, Thiago2017-07-21T20:42:30Z2009-03-042017-07-21T20:42:30Z2008-12-18SEQUINEL, Thiago. DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA. 2008. 85 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2008.http://tede2.uepg.br/jspui/handle/prefix/1389In this work has been developed a new way to impregnate using high pressure. Thin film were obtained in soda-lime glass surface when it were used Co3O4, Al2O3, TiO2 and SnO2 as a oxides deposited, across a furnace confectioned for this experiment. SnO2 was results of two different chemical methods of synthesis. It was able to control tree variable: temperature, time and final pressure of test from an initial pressure of dry synthetic air. Results were characterized by X-ray diffraction, X-ray fluorescence of the powder and film morphology was analyzed by scan electronic microscopy. Using nanoindentation with Berkovich tip the mechanical properties were determined of the films produced, calculating the Young Modulus and hardness, and using Vickers indentation was possible to calculate the fracture toughness. Experimental process results to different oxides were compared among them and it were able to verify the viability of this new way to product a thin film.Neste trabalho foi desenvolvida uma nova técnica de impregnação forçada de óxidos utilizando pressão elevada. Através de um forno confeccionado especificamente para esta finalidade foram obtidos filmes finos de óxidos em substrato de vidro alcalino plano comercial quando impregnados com Co3O4, Al2O3, TiO2 e SnO2, sendo este último, obtido por duas rotas diferenciadas de síntese química. Nos ensaios foram controladas três variáveis: a temperatura, o tempo e a pressão final. Os resultados foram caracterizados por técnica de difração de raios X, fluorescência de raios X e, a morfologia, foi analisada por microscopia eletrônica de varredura. Por meio de testes de nanoindentação, utilizando ponta de Berkovich, investigaram-se as propriedades mecânicas de dureza e módulo elástico e, por ensaios de indentação Vickers, determinou-se a tenacidade a fratura dos filmes. Os resultados deste processo experimental para os diferentes óxidos utilizados foram comparados entre si onde foi possível verificar a viabilidade desta nova proposta de impregnação/deposição de óxidos na forma de filmes finos para geração de filmes finos.Made available in DSpace on 2017-07-21T20:42:30Z (GMT). No. of bitstreams: 1 ThiagoSequinel.pdf: 1595197 bytes, checksum: 5515204beff5d51a8f32526202464225 (MD5) Previous issue date: 2008-12-18Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUNIVERSIDADE ESTADUAL DE PONTA GROSSAPrograma de Pós-Graduação em Engenharia e Ciências de MateriaisUEPGBRDesenvolvimento e Caracterização de Materiaisfilme finoimpregnaçãooxidos metálicosCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICADETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADAinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UEPGinstname:Universidade Estadual de Ponta Grossa (UEPG)instacron:UEPGORIGINALThiagoSequinel.pdfapplication/pdf1595197http://tede2.uepg.br/jspui/bitstream/prefix/1389/1/ThiagoSequinel.pdf5515204beff5d51a8f32526202464225MD51prefix/13892017-07-21 17:42:30.793oai:tede2.uepg.br:prefix/1389Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.uepg.br/jspui/PUBhttp://tede2.uepg.br/oai/requestbicen@uepg.br||mv_fidelis@yahoo.com.bropendoar:2017-07-21T20:42:30Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)false |
dc.title.por.fl_str_mv |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
title |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
spellingShingle |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA Sequinel, Thiago filme fino impregnação oxidos metálicos CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
title_full |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
title_fullStr |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
title_full_unstemmed |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
title_sort |
DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA |
author |
Sequinel, Thiago |
author_facet |
Sequinel, Thiago |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Tebcherani, Sérgio Mazurek |
dc.contributor.advisor1ID.fl_str_mv |
CPF:53106090949 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4798869J5 |
dc.contributor.advisor-co1.fl_str_mv |
Michel, Milton Domingos |
dc.contributor.advisor-co1ID.fl_str_mv |
CPF:55392199968 |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4709471J8 |
dc.contributor.referee1.fl_str_mv |
Varela, José Arana |
dc.contributor.referee1ID.fl_str_mv |
CPF:04111508804 |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4709471J8 |
dc.contributor.referee2.fl_str_mv |
Chinelatto, Adriana Scoton Antônio |
dc.contributor.referee2ID.fl_str_mv |
CPF:13967937801 |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721108U7 |
dc.contributor.authorID.fl_str_mv |
CPF:66754879068 |
dc.contributor.author.fl_str_mv |
Sequinel, Thiago |
contributor_str_mv |
Tebcherani, Sérgio Mazurek Michel, Milton Domingos Varela, José Arana Chinelatto, Adriana Scoton Antônio |
dc.subject.por.fl_str_mv |
filme fino impregnação oxidos metálicos |
topic |
filme fino impregnação oxidos metálicos CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
In this work has been developed a new way to impregnate using high pressure. Thin film were obtained in soda-lime glass surface when it were used Co3O4, Al2O3, TiO2 and SnO2 as a oxides deposited, across a furnace confectioned for this experiment. SnO2 was results of two different chemical methods of synthesis. It was able to control tree variable: temperature, time and final pressure of test from an initial pressure of dry synthetic air. Results were characterized by X-ray diffraction, X-ray fluorescence of the powder and film morphology was analyzed by scan electronic microscopy. Using nanoindentation with Berkovich tip the mechanical properties were determined of the films produced, calculating the Young Modulus and hardness, and using Vickers indentation was possible to calculate the fracture toughness. Experimental process results to different oxides were compared among them and it were able to verify the viability of this new way to product a thin film. |
publishDate |
2008 |
dc.date.issued.fl_str_mv |
2008-12-18 |
dc.date.available.fl_str_mv |
2009-03-04 2017-07-21T20:42:30Z |
dc.date.accessioned.fl_str_mv |
2017-07-21T20:42:30Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SEQUINEL, Thiago. DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA. 2008. 85 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2008. |
dc.identifier.uri.fl_str_mv |
http://tede2.uepg.br/jspui/handle/prefix/1389 |
identifier_str_mv |
SEQUINEL, Thiago. DETERMINAÇÃO DAS PROPRIEDADES MECÂNICAS E CARACTERIZAÇÃO DE FILME FINO PRODUZIDO POR IMPREGNAÇÃO FORÇADA. 2008. 85 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2008. |
url |
http://tede2.uepg.br/jspui/handle/prefix/1389 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia e Ciências de Materiais |
dc.publisher.initials.fl_str_mv |
UEPG |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Desenvolvimento e Caracterização de Materiais |
publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UEPG instname:Universidade Estadual de Ponta Grossa (UEPG) instacron:UEPG |
instname_str |
Universidade Estadual de Ponta Grossa (UEPG) |
instacron_str |
UEPG |
institution |
UEPG |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
collection |
Biblioteca Digital de Teses e Dissertações da UEPG |
bitstream.url.fl_str_mv |
http://tede2.uepg.br/jspui/bitstream/prefix/1389/1/ThiagoSequinel.pdf |
bitstream.checksum.fl_str_mv |
5515204beff5d51a8f32526202464225 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG) |
repository.mail.fl_str_mv |
bicen@uepg.br||mv_fidelis@yahoo.com.br |
_version_ |
1797039578880671744 |