Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais

Detalhes bibliográficos
Ano de defesa: 2022
Autor(a) principal: Guimarães, Guilherme Brilhante
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Federal de Uberlândia
Brasil
Programa de Pós-graduação em Engenharia Biomédica
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: https://repositorio.ufu.br/handle/123456789/35482
http://doi.org/10.14393/ufu.di.2022.396
Resumo: Intraoral radiographs are composed of three techniques, periapical, bitewing, and occlusal, and are used to visualize the structures of the oral cavity. The techniques are differenti ated by the positioning of the x-ray equipment, photographic receptors, and equipment configurations. In some situations, patients may be submitted to many dental exams, depending on the dental treatment, where the primary beams of radiation directed to radiosensitive organs and tissues may present risks to the patients’ health. The objective of this work was to develop a head and neck phantom and to computationally calculate the Conversion Coefficients for Absorbed Dose (CC[D]) in the phantom’s radiosensitive organs and tissues for the exposure scenarios of intraoral radiographs. The CC[D] were calculated by Monte Carlo simulations with Monte Carlo N-Particle (MCNP) code (version 6.2), considering the voltages of 60, 65, and 70 kVp with filtration between 1.5 mmAl and 2.5 mmAl, recommended for intraoral radiographs, and the placements of the periapical, bitewing and occlusal techniques. The results showed the salivary glands showed the highest CC[D] values in the intraoral techniques, with the sublingual glands having the highest deposited energies, followed by the parotid and submandibular glands. In some positions of the periapical and occlusal techniques, organs such as the eyes, lens, and thyroid, presented higher CC[D] values, due to the direction of the primary radiation beams and the positioning of the techniques.
id UFU_fb770e2c17a17b1456abec0df89a3baf
oai_identifier_str oai:repositorio.ufu.br:123456789/35482
network_acronym_str UFU
network_name_str Repositório Institucional da UFU
repository_id_str
spelling Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraoraisDevelopment of a virtual simulator object for dosimetry in intraoral radiographsRadiografias intraoraisSimulação de Monte CarloObjetos SimuladoresRadiação IonizanteIntraoral RadiographsMonte Carlo SimulationPhantomsIonizing RadiationCNPQ::ENGENHARIAS::ENGENHARIA NUCLEAR::APLICACOES DE RADIOISOTOPOS::INSTRUMENTACAO PARA MEDIDA E CONTROLE DE RADIACAOEngenharia biomédicaRadiação ionizanteDentes - RadiografiaBoca - Cuidado e higieneIntraoral radiographs are composed of three techniques, periapical, bitewing, and occlusal, and are used to visualize the structures of the oral cavity. The techniques are differenti ated by the positioning of the x-ray equipment, photographic receptors, and equipment configurations. In some situations, patients may be submitted to many dental exams, depending on the dental treatment, where the primary beams of radiation directed to radiosensitive organs and tissues may present risks to the patients’ health. The objective of this work was to develop a head and neck phantom and to computationally calculate the Conversion Coefficients for Absorbed Dose (CC[D]) in the phantom’s radiosensitive organs and tissues for the exposure scenarios of intraoral radiographs. The CC[D] were calculated by Monte Carlo simulations with Monte Carlo N-Particle (MCNP) code (version 6.2), considering the voltages of 60, 65, and 70 kVp with filtration between 1.5 mmAl and 2.5 mmAl, recommended for intraoral radiographs, and the placements of the periapical, bitewing and occlusal techniques. The results showed the salivary glands showed the highest CC[D] values in the intraoral techniques, with the sublingual glands having the highest deposited energies, followed by the parotid and submandibular glands. In some positions of the periapical and occlusal techniques, organs such as the eyes, lens, and thyroid, presented higher CC[D] values, due to the direction of the primary radiation beams and the positioning of the techniques.Dissertação (Mestrado)As radiografias intraorais são três técnicas, periapical, bitewing e oclusal, e são utilizadas para visualização das estruturas da cavidade bucal. As técnicas se diferenciam pelos posicionamentos do aparelho de raios-X, receptores fotográficos, e as configurações do equipamento. Em algumas situações os pacientes podem ser submetidos a muitos exames odontológicos, dependendo do tratamento odontológico, onde os feixes primários de radiação direcionado aos órgãos e tecidos radiossensíveis podem resultar em riscos a saúde dos pacientes. O objetivo deste trabalho foi desenvolver um objeto simulador antropomórfico de cabeça e pescoço, e calcular computacionalmente os Coeficientes de Conversão para Dose Absorvida (CC[D]) nos órgãos e tecidos radiossensíveis do objeto simulador, para os cenários de exposição das radiografias intraorais. Os CC[D] foram calculados empregando simulações de Monte Carlo com código Monte Carlo N-Particle (MCNP) (versão 6.2), considerando as tensões de 60, 65 e 70 kVp com filtração entre 1,5 mmAl e 2,5 mmAl, recomendado para radiografias intraorais, e os posicionamentos das técnicas periapical, bitewing e oclusal. Os resultados demonstraram que as glândulas salivares apresentaram os maiores valores de CC[D] nas técnicas intraorais, sendo as glândulas sublinguais expostas as maiores energias depositadas, seguida das glândulas parótidas e submandibulares. Em alguns posicionamentos das técnicas periapical e oclusal, órgãos como os olhos, cristalino e a tireoide, apresentaram valores maiores de CC[D], devido à direção dos feixes primários de radiação e ao posicionamento das técnicas.Universidade Federal de UberlândiaBrasilPrograma de Pós-graduação em Engenharia BiomédicaNeves, Lucio Pereirahttp://lattes.cnpq.br/9028304261745922Souza, Divanizia do Nascimentohttp://lattes.cnpq.br/3897283209013869Santos, William de Souzahttp://lattes.cnpq.br/5150139546603006Guimarães, Guilherme Brilhante2022-08-17T13:11:22Z2022-08-17T13:11:22Z2022-08-08info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfGUIMARÃES, Guilherme Brilhante. Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais. 2022. 81 f. Dissertação (Mestrado em Engenharia Biomédica) - Universidade Federal de Uberlândia, Uberlândia, 2022. DOI http://doi.org/10.14393/ufu.di.2022.396.https://repositorio.ufu.br/handle/123456789/35482http://doi.org/10.14393/ufu.di.2022.396porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFUinstname:Universidade Federal de Uberlândia (UFU)instacron:UFU2022-08-18T06:15:13Zoai:repositorio.ufu.br:123456789/35482Repositório InstitucionalONGhttp://repositorio.ufu.br/oai/requestdiinf@dirbi.ufu.bropendoar:2022-08-18T06:15:13Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)false
dc.title.none.fl_str_mv Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
Development of a virtual simulator object for dosimetry in intraoral radiographs
title Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
spellingShingle Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
Guimarães, Guilherme Brilhante
Radiografias intraorais
Simulação de Monte Carlo
Objetos Simuladores
Radiação Ionizante
Intraoral Radiographs
Monte Carlo Simulation
Phantoms
Ionizing Radiation
CNPQ::ENGENHARIAS::ENGENHARIA NUCLEAR::APLICACOES DE RADIOISOTOPOS::INSTRUMENTACAO PARA MEDIDA E CONTROLE DE RADIACAO
Engenharia biomédica
Radiação ionizante
Dentes - Radiografia
Boca - Cuidado e higiene
title_short Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
title_full Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
title_fullStr Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
title_full_unstemmed Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
title_sort Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais
author Guimarães, Guilherme Brilhante
author_facet Guimarães, Guilherme Brilhante
author_role author
dc.contributor.none.fl_str_mv Neves, Lucio Pereira
http://lattes.cnpq.br/9028304261745922
Souza, Divanizia do Nascimento
http://lattes.cnpq.br/3897283209013869
Santos, William de Souza
http://lattes.cnpq.br/5150139546603006
dc.contributor.author.fl_str_mv Guimarães, Guilherme Brilhante
dc.subject.por.fl_str_mv Radiografias intraorais
Simulação de Monte Carlo
Objetos Simuladores
Radiação Ionizante
Intraoral Radiographs
Monte Carlo Simulation
Phantoms
Ionizing Radiation
CNPQ::ENGENHARIAS::ENGENHARIA NUCLEAR::APLICACOES DE RADIOISOTOPOS::INSTRUMENTACAO PARA MEDIDA E CONTROLE DE RADIACAO
Engenharia biomédica
Radiação ionizante
Dentes - Radiografia
Boca - Cuidado e higiene
topic Radiografias intraorais
Simulação de Monte Carlo
Objetos Simuladores
Radiação Ionizante
Intraoral Radiographs
Monte Carlo Simulation
Phantoms
Ionizing Radiation
CNPQ::ENGENHARIAS::ENGENHARIA NUCLEAR::APLICACOES DE RADIOISOTOPOS::INSTRUMENTACAO PARA MEDIDA E CONTROLE DE RADIACAO
Engenharia biomédica
Radiação ionizante
Dentes - Radiografia
Boca - Cuidado e higiene
description Intraoral radiographs are composed of three techniques, periapical, bitewing, and occlusal, and are used to visualize the structures of the oral cavity. The techniques are differenti ated by the positioning of the x-ray equipment, photographic receptors, and equipment configurations. In some situations, patients may be submitted to many dental exams, depending on the dental treatment, where the primary beams of radiation directed to radiosensitive organs and tissues may present risks to the patients’ health. The objective of this work was to develop a head and neck phantom and to computationally calculate the Conversion Coefficients for Absorbed Dose (CC[D]) in the phantom’s radiosensitive organs and tissues for the exposure scenarios of intraoral radiographs. The CC[D] were calculated by Monte Carlo simulations with Monte Carlo N-Particle (MCNP) code (version 6.2), considering the voltages of 60, 65, and 70 kVp with filtration between 1.5 mmAl and 2.5 mmAl, recommended for intraoral radiographs, and the placements of the periapical, bitewing and occlusal techniques. The results showed the salivary glands showed the highest CC[D] values in the intraoral techniques, with the sublingual glands having the highest deposited energies, followed by the parotid and submandibular glands. In some positions of the periapical and occlusal techniques, organs such as the eyes, lens, and thyroid, presented higher CC[D] values, due to the direction of the primary radiation beams and the positioning of the techniques.
publishDate 2022
dc.date.none.fl_str_mv 2022-08-17T13:11:22Z
2022-08-17T13:11:22Z
2022-08-08
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv GUIMARÃES, Guilherme Brilhante. Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais. 2022. 81 f. Dissertação (Mestrado em Engenharia Biomédica) - Universidade Federal de Uberlândia, Uberlândia, 2022. DOI http://doi.org/10.14393/ufu.di.2022.396.
https://repositorio.ufu.br/handle/123456789/35482
http://doi.org/10.14393/ufu.di.2022.396
identifier_str_mv GUIMARÃES, Guilherme Brilhante. Desenvolvimento de um objeto simulador virtual para dosimetria em radiografias intraorais. 2022. 81 f. Dissertação (Mestrado em Engenharia Biomédica) - Universidade Federal de Uberlândia, Uberlândia, 2022. DOI http://doi.org/10.14393/ufu.di.2022.396.
url https://repositorio.ufu.br/handle/123456789/35482
http://doi.org/10.14393/ufu.di.2022.396
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Uberlândia
Brasil
Programa de Pós-graduação em Engenharia Biomédica
publisher.none.fl_str_mv Universidade Federal de Uberlândia
Brasil
Programa de Pós-graduação em Engenharia Biomédica
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFU
instname:Universidade Federal de Uberlândia (UFU)
instacron:UFU
instname_str Universidade Federal de Uberlândia (UFU)
instacron_str UFU
institution UFU
reponame_str Repositório Institucional da UFU
collection Repositório Institucional da UFU
repository.name.fl_str_mv Repositório Institucional da UFU - Universidade Federal de Uberlândia (UFU)
repository.mail.fl_str_mv diinf@dirbi.ufu.br
_version_ 1805396990875402240