Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante

Detalhes bibliográficos
Ano de defesa: 2015
Autor(a) principal: Santos, Thiago Miranda dos
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Ponta Grossa
Brasil
Programa de Pós-Graduação em Engenharia Mecânica
UTFPR
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/1968
Resumo: Bubbling fluidized beds (LFB) have been used in many industrial applications, with emphasis on energy conversion of solid fuel combustion reactor, gasification and fast pyrolysis. In recent years, the study of fluid dynamics mixture of sand-biomass LFB reactors is gaining importance due to the need to identify the emergence of undesired phenomena in the gas-solid flow, such as sudden defluidization and segregation of particles promoted by the nature polydispersed of the bed material. In order to contribute in this direction, the present work studies the fluid mixtures sandsawing in relation to the previously described phenomena and chaotic behavior intensity of the fluidized bed under various operating conditions. Bed pressure fluctuation measurements were taken to study the defluidization and segregation of particles with the Gaussian spectral technique’s support as well as the presence of chaos using wavelet and 0-1 Test. The bed material consisted of quartz sand and mixtures of pine sawdust with mass percentages of 2.5% and 5% and the inventories of 0.5 and 1.0 kg. Experimental tests were performed in a Plexiglas column of internal diameter 0.11 m and 1.0 m of height. The static pressure values of the bed were recorded using a data acquisition system composed of fast response pressure transducers and software LabVIEWTM version 10.0. The tests followed a 22 factorial design with triplicate, totaling 12 experiments with mixtures sand-sawdust. Thus, with the results were obtained fluid dynamics and curves of central frequency, both used to identify the state of minimum fluidization of the bed. Additionally, the biomass concentration variation curves were prepared according to the layers height of the bed for evaluating the intensity of the segregation. The results showed that in all cases the defluidization region is reached in superficial gas velocity around of 0.05 m/s. Compared to the study of segregation, the results suggest that it tends to be higher for shallow bed than deep beds, not being clearly seen the effect of the percentage of biomass in the mixture within the range tested. A statistical analysis and Pareto chart were used to confirm the significance of the trends observed. The pressure data in the minimum fluidization condition were used to determine the chaotic behavior of the tested mixtures. Thus, the results showed that in all test, the behavior were chaotic, showing in the quantitative analysis, 0-1 test, results of the K* parameter above 0.9 and in the qualitative analysis using wavelet, presented distributed energy regions.
id UTFPR-12_235a55eb80d39a8aee8fd9b662c978e4
oai_identifier_str oai:repositorio.utfpr.edu.br:1/1968
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhanteStudy of defluidization, segregation and chaos of sand-sawdust binary mixtures in bubbling fluidized bedFluidizaçãoBiomassaEngenharia mecânicaFluidizationBiomassMechanical engineeringCNPQ::ENGENHARIAS::ENGENHARIA MECANICABubbling fluidized beds (LFB) have been used in many industrial applications, with emphasis on energy conversion of solid fuel combustion reactor, gasification and fast pyrolysis. In recent years, the study of fluid dynamics mixture of sand-biomass LFB reactors is gaining importance due to the need to identify the emergence of undesired phenomena in the gas-solid flow, such as sudden defluidization and segregation of particles promoted by the nature polydispersed of the bed material. In order to contribute in this direction, the present work studies the fluid mixtures sandsawing in relation to the previously described phenomena and chaotic behavior intensity of the fluidized bed under various operating conditions. Bed pressure fluctuation measurements were taken to study the defluidization and segregation of particles with the Gaussian spectral technique’s support as well as the presence of chaos using wavelet and 0-1 Test. The bed material consisted of quartz sand and mixtures of pine sawdust with mass percentages of 2.5% and 5% and the inventories of 0.5 and 1.0 kg. Experimental tests were performed in a Plexiglas column of internal diameter 0.11 m and 1.0 m of height. The static pressure values of the bed were recorded using a data acquisition system composed of fast response pressure transducers and software LabVIEWTM version 10.0. The tests followed a 22 factorial design with triplicate, totaling 12 experiments with mixtures sand-sawdust. Thus, with the results were obtained fluid dynamics and curves of central frequency, both used to identify the state of minimum fluidization of the bed. Additionally, the biomass concentration variation curves were prepared according to the layers height of the bed for evaluating the intensity of the segregation. The results showed that in all cases the defluidization region is reached in superficial gas velocity around of 0.05 m/s. Compared to the study of segregation, the results suggest that it tends to be higher for shallow bed than deep beds, not being clearly seen the effect of the percentage of biomass in the mixture within the range tested. A statistical analysis and Pareto chart were used to confirm the significance of the trends observed. The pressure data in the minimum fluidization condition were used to determine the chaotic behavior of the tested mixtures. Thus, the results showed that in all test, the behavior were chaotic, showing in the quantitative analysis, 0-1 test, results of the K* parameter above 0.9 and in the qualitative analysis using wavelet, presented distributed energy regions.Leitos fluidizados borbulhantes (LFB) têm sido utilizados em muitas aplicações industriais, tendo destaque na conversão energética de combustíveis sólidos em reatores de combustão, gaseificação e pirólise rápida. Nos últimos anos, o estudo da fluidodinâmica de misturas areia-biomassa em reatores de LFB vem ganhando importância, devido à necessidade de identificar o surgimento de fenômenos indesejados no escoamento gás-sólido, tais como a defluidização súbita e a segregação de partículas promovida pela natureza polidispersa dos materiais do leito. Com o propósito de contribuir nesta direção, o presente trabalho estuda a fluidodinâmica de misturas areia-serragem em relação aos fenômenos anteriormente descritos e à intensidade do comportamento caótico do leito fluidizado sob várias condições operacionais. Medidas de flutuação de pressão do leito foram obtidas a fim de estudar a defluidização e a segregação de partículas com apoio da técnica de análise espectral Gaussiana, bem como, a presença de caos utilizando wavelet e o teste 0-1. O material do leito foi constituído por misturas de areia quartzosa e serragem de pinus em porcentagens mássicas de 2,5% e 5% de biomassa, nos inventários de leito de 0,5 e 1,0 kg. Os testes experimentais foram realizados numa coluna de acrílico de 0,11 m de diâmetro interno e 1,0 m de altura. Os valores de pressão estática do leito foram registrados utilizando um sistema de aquisição de dados composto de transdutores de pressão de resposta rápida e software LabVIEWTM versão 10.0. Os ensaios seguiram um planejamento fatorial 22 com três repetições, totalizando 12 experimentos com misturas areia-serragem. Com os resultados foram obtidas as curvas fluidodinâmica e de frequência central, ambas utilizadas para a identificação do estado de mínima fluidização do leito. Adicionalmente, foram elaboradas curvas de variação de concentração de biomassa em função da altura de camadas do leito para a avaliação da intensidade da segregação. Os resultados mostraram que, em todos os casos, a região de defluidização é atingida em uma velocidade superficial do gás próxima ao valor de 0,05 m/s. Em relação ao estudo de segregação, os resultados sugerem que esta tende a ser maior para leitos rasos do que para leitos profundos, não sendo claramente verificado o efeito da porcentagem de biomassa na mistura dentro da faixa testada. Uma análise estatística e gráfico de pareto foram utilizados para confirmar a significância das tendências observadas. Os dados de pressão na condição de mínima fluidização foram utilizados para determinar a presença de comportamento caótico das misturas testadas. Neste sentido, verificou-se que em todos os ensaios o comportamento foi caótico, apresentando na análise quantitativa, ou seja, teste 0-1, resultados do parâmetro K* superior a 0,9 e na análise qualitativa utilizando wavelet, regiões de energias distribuídas.Universidade Tecnológica Federal do ParanáPonta GrossaBrasilPrograma de Pós-Graduação em Engenharia MecânicaUTFPRParise, Maria Reginahttp://lattes.cnpq.br/9628534130171420Tusset, Ângelo Marcelohttp://lattes.cnpq.br/1204232509410955Parise, Maria ReginaOliveira, Jùlio Cesar Dainezi deBehainne, Jhon Jairo RamirezTusset, Angelo MarceloSantos, Thiago Miranda dos2017-02-14T18:39:21Z2017-02-14T18:39:21Z2015-12-17info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSANTOS, Thiago Miranda dos. Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante. 2015. 110 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.http://repositorio.utfpr.edu.br/jspui/handle/1/1968porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2017-02-15T05:01:38Zoai:repositorio.utfpr.edu.br:1/1968Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2017-02-15T05:01:38Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
Study of defluidization, segregation and chaos of sand-sawdust binary mixtures in bubbling fluidized bed
title Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
spellingShingle Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
Santos, Thiago Miranda dos
Fluidização
Biomassa
Engenharia mecânica
Fluidization
Biomass
Mechanical engineering
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
title_short Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
title_full Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
title_fullStr Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
title_full_unstemmed Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
title_sort Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
author Santos, Thiago Miranda dos
author_facet Santos, Thiago Miranda dos
author_role author
dc.contributor.none.fl_str_mv Parise, Maria Regina
http://lattes.cnpq.br/9628534130171420
Tusset, Ângelo Marcelo
http://lattes.cnpq.br/1204232509410955
Parise, Maria Regina
Oliveira, Jùlio Cesar Dainezi de
Behainne, Jhon Jairo Ramirez
Tusset, Angelo Marcelo
dc.contributor.author.fl_str_mv Santos, Thiago Miranda dos
dc.subject.por.fl_str_mv Fluidização
Biomassa
Engenharia mecânica
Fluidization
Biomass
Mechanical engineering
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
topic Fluidização
Biomassa
Engenharia mecânica
Fluidization
Biomass
Mechanical engineering
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
description Bubbling fluidized beds (LFB) have been used in many industrial applications, with emphasis on energy conversion of solid fuel combustion reactor, gasification and fast pyrolysis. In recent years, the study of fluid dynamics mixture of sand-biomass LFB reactors is gaining importance due to the need to identify the emergence of undesired phenomena in the gas-solid flow, such as sudden defluidization and segregation of particles promoted by the nature polydispersed of the bed material. In order to contribute in this direction, the present work studies the fluid mixtures sandsawing in relation to the previously described phenomena and chaotic behavior intensity of the fluidized bed under various operating conditions. Bed pressure fluctuation measurements were taken to study the defluidization and segregation of particles with the Gaussian spectral technique’s support as well as the presence of chaos using wavelet and 0-1 Test. The bed material consisted of quartz sand and mixtures of pine sawdust with mass percentages of 2.5% and 5% and the inventories of 0.5 and 1.0 kg. Experimental tests were performed in a Plexiglas column of internal diameter 0.11 m and 1.0 m of height. The static pressure values of the bed were recorded using a data acquisition system composed of fast response pressure transducers and software LabVIEWTM version 10.0. The tests followed a 22 factorial design with triplicate, totaling 12 experiments with mixtures sand-sawdust. Thus, with the results were obtained fluid dynamics and curves of central frequency, both used to identify the state of minimum fluidization of the bed. Additionally, the biomass concentration variation curves were prepared according to the layers height of the bed for evaluating the intensity of the segregation. The results showed that in all cases the defluidization region is reached in superficial gas velocity around of 0.05 m/s. Compared to the study of segregation, the results suggest that it tends to be higher for shallow bed than deep beds, not being clearly seen the effect of the percentage of biomass in the mixture within the range tested. A statistical analysis and Pareto chart were used to confirm the significance of the trends observed. The pressure data in the minimum fluidization condition were used to determine the chaotic behavior of the tested mixtures. Thus, the results showed that in all test, the behavior were chaotic, showing in the quantitative analysis, 0-1 test, results of the K* parameter above 0.9 and in the qualitative analysis using wavelet, presented distributed energy regions.
publishDate 2015
dc.date.none.fl_str_mv 2015-12-17
2017-02-14T18:39:21Z
2017-02-14T18:39:21Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SANTOS, Thiago Miranda dos. Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante. 2015. 110 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.
http://repositorio.utfpr.edu.br/jspui/handle/1/1968
identifier_str_mv SANTOS, Thiago Miranda dos. Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante. 2015. 110 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.
url http://repositorio.utfpr.edu.br/jspui/handle/1/1968
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Ponta Grossa
Brasil
Programa de Pós-Graduação em Engenharia Mecânica
UTFPR
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Ponta Grossa
Brasil
Programa de Pós-Graduação em Engenharia Mecânica
UTFPR
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1850498318238482432