Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante
| Ano de defesa: | 2015 |
|---|---|
| Autor(a) principal: | |
| Orientador(a): | |
| Banca de defesa: | |
| Tipo de documento: | Dissertação |
| Tipo de acesso: | Acesso aberto |
| Idioma: | por |
| Instituição de defesa: |
Universidade Tecnológica Federal do Paraná
Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia Mecânica UTFPR |
| Programa de Pós-Graduação: |
Não Informado pela instituição
|
| Departamento: |
Não Informado pela instituição
|
| País: |
Não Informado pela instituição
|
| Palavras-chave em Português: | |
| Link de acesso: | http://repositorio.utfpr.edu.br/jspui/handle/1/1968 |
Resumo: | Bubbling fluidized beds (LFB) have been used in many industrial applications, with emphasis on energy conversion of solid fuel combustion reactor, gasification and fast pyrolysis. In recent years, the study of fluid dynamics mixture of sand-biomass LFB reactors is gaining importance due to the need to identify the emergence of undesired phenomena in the gas-solid flow, such as sudden defluidization and segregation of particles promoted by the nature polydispersed of the bed material. In order to contribute in this direction, the present work studies the fluid mixtures sandsawing in relation to the previously described phenomena and chaotic behavior intensity of the fluidized bed under various operating conditions. Bed pressure fluctuation measurements were taken to study the defluidization and segregation of particles with the Gaussian spectral technique’s support as well as the presence of chaos using wavelet and 0-1 Test. The bed material consisted of quartz sand and mixtures of pine sawdust with mass percentages of 2.5% and 5% and the inventories of 0.5 and 1.0 kg. Experimental tests were performed in a Plexiglas column of internal diameter 0.11 m and 1.0 m of height. The static pressure values of the bed were recorded using a data acquisition system composed of fast response pressure transducers and software LabVIEWTM version 10.0. The tests followed a 22 factorial design with triplicate, totaling 12 experiments with mixtures sand-sawdust. Thus, with the results were obtained fluid dynamics and curves of central frequency, both used to identify the state of minimum fluidization of the bed. Additionally, the biomass concentration variation curves were prepared according to the layers height of the bed for evaluating the intensity of the segregation. The results showed that in all cases the defluidization region is reached in superficial gas velocity around of 0.05 m/s. Compared to the study of segregation, the results suggest that it tends to be higher for shallow bed than deep beds, not being clearly seen the effect of the percentage of biomass in the mixture within the range tested. A statistical analysis and Pareto chart were used to confirm the significance of the trends observed. The pressure data in the minimum fluidization condition were used to determine the chaotic behavior of the tested mixtures. Thus, the results showed that in all test, the behavior were chaotic, showing in the quantitative analysis, 0-1 test, results of the K* parameter above 0.9 and in the qualitative analysis using wavelet, presented distributed energy regions. |
| id |
UTFPR-12_235a55eb80d39a8aee8fd9b662c978e4 |
|---|---|
| oai_identifier_str |
oai:repositorio.utfpr.edu.br:1/1968 |
| network_acronym_str |
UTFPR-12 |
| network_name_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository_id_str |
|
| spelling |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhanteStudy of defluidization, segregation and chaos of sand-sawdust binary mixtures in bubbling fluidized bedFluidizaçãoBiomassaEngenharia mecânicaFluidizationBiomassMechanical engineeringCNPQ::ENGENHARIAS::ENGENHARIA MECANICABubbling fluidized beds (LFB) have been used in many industrial applications, with emphasis on energy conversion of solid fuel combustion reactor, gasification and fast pyrolysis. In recent years, the study of fluid dynamics mixture of sand-biomass LFB reactors is gaining importance due to the need to identify the emergence of undesired phenomena in the gas-solid flow, such as sudden defluidization and segregation of particles promoted by the nature polydispersed of the bed material. In order to contribute in this direction, the present work studies the fluid mixtures sandsawing in relation to the previously described phenomena and chaotic behavior intensity of the fluidized bed under various operating conditions. Bed pressure fluctuation measurements were taken to study the defluidization and segregation of particles with the Gaussian spectral technique’s support as well as the presence of chaos using wavelet and 0-1 Test. The bed material consisted of quartz sand and mixtures of pine sawdust with mass percentages of 2.5% and 5% and the inventories of 0.5 and 1.0 kg. Experimental tests were performed in a Plexiglas column of internal diameter 0.11 m and 1.0 m of height. The static pressure values of the bed were recorded using a data acquisition system composed of fast response pressure transducers and software LabVIEWTM version 10.0. The tests followed a 22 factorial design with triplicate, totaling 12 experiments with mixtures sand-sawdust. Thus, with the results were obtained fluid dynamics and curves of central frequency, both used to identify the state of minimum fluidization of the bed. Additionally, the biomass concentration variation curves were prepared according to the layers height of the bed for evaluating the intensity of the segregation. The results showed that in all cases the defluidization region is reached in superficial gas velocity around of 0.05 m/s. Compared to the study of segregation, the results suggest that it tends to be higher for shallow bed than deep beds, not being clearly seen the effect of the percentage of biomass in the mixture within the range tested. A statistical analysis and Pareto chart were used to confirm the significance of the trends observed. The pressure data in the minimum fluidization condition were used to determine the chaotic behavior of the tested mixtures. Thus, the results showed that in all test, the behavior were chaotic, showing in the quantitative analysis, 0-1 test, results of the K* parameter above 0.9 and in the qualitative analysis using wavelet, presented distributed energy regions.Leitos fluidizados borbulhantes (LFB) têm sido utilizados em muitas aplicações industriais, tendo destaque na conversão energética de combustíveis sólidos em reatores de combustão, gaseificação e pirólise rápida. Nos últimos anos, o estudo da fluidodinâmica de misturas areia-biomassa em reatores de LFB vem ganhando importância, devido à necessidade de identificar o surgimento de fenômenos indesejados no escoamento gás-sólido, tais como a defluidização súbita e a segregação de partículas promovida pela natureza polidispersa dos materiais do leito. Com o propósito de contribuir nesta direção, o presente trabalho estuda a fluidodinâmica de misturas areia-serragem em relação aos fenômenos anteriormente descritos e à intensidade do comportamento caótico do leito fluidizado sob várias condições operacionais. Medidas de flutuação de pressão do leito foram obtidas a fim de estudar a defluidização e a segregação de partículas com apoio da técnica de análise espectral Gaussiana, bem como, a presença de caos utilizando wavelet e o teste 0-1. O material do leito foi constituído por misturas de areia quartzosa e serragem de pinus em porcentagens mássicas de 2,5% e 5% de biomassa, nos inventários de leito de 0,5 e 1,0 kg. Os testes experimentais foram realizados numa coluna de acrílico de 0,11 m de diâmetro interno e 1,0 m de altura. Os valores de pressão estática do leito foram registrados utilizando um sistema de aquisição de dados composto de transdutores de pressão de resposta rápida e software LabVIEWTM versão 10.0. Os ensaios seguiram um planejamento fatorial 22 com três repetições, totalizando 12 experimentos com misturas areia-serragem. Com os resultados foram obtidas as curvas fluidodinâmica e de frequência central, ambas utilizadas para a identificação do estado de mínima fluidização do leito. Adicionalmente, foram elaboradas curvas de variação de concentração de biomassa em função da altura de camadas do leito para a avaliação da intensidade da segregação. Os resultados mostraram que, em todos os casos, a região de defluidização é atingida em uma velocidade superficial do gás próxima ao valor de 0,05 m/s. Em relação ao estudo de segregação, os resultados sugerem que esta tende a ser maior para leitos rasos do que para leitos profundos, não sendo claramente verificado o efeito da porcentagem de biomassa na mistura dentro da faixa testada. Uma análise estatística e gráfico de pareto foram utilizados para confirmar a significância das tendências observadas. Os dados de pressão na condição de mínima fluidização foram utilizados para determinar a presença de comportamento caótico das misturas testadas. Neste sentido, verificou-se que em todos os ensaios o comportamento foi caótico, apresentando na análise quantitativa, ou seja, teste 0-1, resultados do parâmetro K* superior a 0,9 e na análise qualitativa utilizando wavelet, regiões de energias distribuídas.Universidade Tecnológica Federal do ParanáPonta GrossaBrasilPrograma de Pós-Graduação em Engenharia MecânicaUTFPRParise, Maria Reginahttp://lattes.cnpq.br/9628534130171420Tusset, Ângelo Marcelohttp://lattes.cnpq.br/1204232509410955Parise, Maria ReginaOliveira, Jùlio Cesar Dainezi deBehainne, Jhon Jairo RamirezTusset, Angelo MarceloSantos, Thiago Miranda dos2017-02-14T18:39:21Z2017-02-14T18:39:21Z2015-12-17info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSANTOS, Thiago Miranda dos. Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante. 2015. 110 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015.http://repositorio.utfpr.edu.br/jspui/handle/1/1968porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2017-02-15T05:01:38Zoai:repositorio.utfpr.edu.br:1/1968Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2017-02-15T05:01:38Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false |
| dc.title.none.fl_str_mv |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante Study of defluidization, segregation and chaos of sand-sawdust binary mixtures in bubbling fluidized bed |
| title |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante |
| spellingShingle |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante Santos, Thiago Miranda dos Fluidização Biomassa Engenharia mecânica Fluidization Biomass Mechanical engineering CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
| title_short |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante |
| title_full |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante |
| title_fullStr |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante |
| title_full_unstemmed |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante |
| title_sort |
Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante |
| author |
Santos, Thiago Miranda dos |
| author_facet |
Santos, Thiago Miranda dos |
| author_role |
author |
| dc.contributor.none.fl_str_mv |
Parise, Maria Regina http://lattes.cnpq.br/9628534130171420 Tusset, Ângelo Marcelo http://lattes.cnpq.br/1204232509410955 Parise, Maria Regina Oliveira, Jùlio Cesar Dainezi de Behainne, Jhon Jairo Ramirez Tusset, Angelo Marcelo |
| dc.contributor.author.fl_str_mv |
Santos, Thiago Miranda dos |
| dc.subject.por.fl_str_mv |
Fluidização Biomassa Engenharia mecânica Fluidization Biomass Mechanical engineering CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
| topic |
Fluidização Biomassa Engenharia mecânica Fluidization Biomass Mechanical engineering CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
| description |
Bubbling fluidized beds (LFB) have been used in many industrial applications, with emphasis on energy conversion of solid fuel combustion reactor, gasification and fast pyrolysis. In recent years, the study of fluid dynamics mixture of sand-biomass LFB reactors is gaining importance due to the need to identify the emergence of undesired phenomena in the gas-solid flow, such as sudden defluidization and segregation of particles promoted by the nature polydispersed of the bed material. In order to contribute in this direction, the present work studies the fluid mixtures sandsawing in relation to the previously described phenomena and chaotic behavior intensity of the fluidized bed under various operating conditions. Bed pressure fluctuation measurements were taken to study the defluidization and segregation of particles with the Gaussian spectral technique’s support as well as the presence of chaos using wavelet and 0-1 Test. The bed material consisted of quartz sand and mixtures of pine sawdust with mass percentages of 2.5% and 5% and the inventories of 0.5 and 1.0 kg. Experimental tests were performed in a Plexiglas column of internal diameter 0.11 m and 1.0 m of height. The static pressure values of the bed were recorded using a data acquisition system composed of fast response pressure transducers and software LabVIEWTM version 10.0. The tests followed a 22 factorial design with triplicate, totaling 12 experiments with mixtures sand-sawdust. Thus, with the results were obtained fluid dynamics and curves of central frequency, both used to identify the state of minimum fluidization of the bed. Additionally, the biomass concentration variation curves were prepared according to the layers height of the bed for evaluating the intensity of the segregation. The results showed that in all cases the defluidization region is reached in superficial gas velocity around of 0.05 m/s. Compared to the study of segregation, the results suggest that it tends to be higher for shallow bed than deep beds, not being clearly seen the effect of the percentage of biomass in the mixture within the range tested. A statistical analysis and Pareto chart were used to confirm the significance of the trends observed. The pressure data in the minimum fluidization condition were used to determine the chaotic behavior of the tested mixtures. Thus, the results showed that in all test, the behavior were chaotic, showing in the quantitative analysis, 0-1 test, results of the K* parameter above 0.9 and in the qualitative analysis using wavelet, presented distributed energy regions. |
| publishDate |
2015 |
| dc.date.none.fl_str_mv |
2015-12-17 2017-02-14T18:39:21Z 2017-02-14T18:39:21Z |
| dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
| dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
| format |
masterThesis |
| status_str |
publishedVersion |
| dc.identifier.uri.fl_str_mv |
SANTOS, Thiago Miranda dos. Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante. 2015. 110 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015. http://repositorio.utfpr.edu.br/jspui/handle/1/1968 |
| identifier_str_mv |
SANTOS, Thiago Miranda dos. Estudo da defluidização, segregação e caos de misturas binárias areia-serragem em leito fluidizado borbulhante. 2015. 110 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Tecnológica Federal do Paraná, Ponta Grossa, 2015. |
| url |
http://repositorio.utfpr.edu.br/jspui/handle/1/1968 |
| dc.language.iso.fl_str_mv |
por |
| language |
por |
| dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
| eu_rights_str_mv |
openAccess |
| dc.format.none.fl_str_mv |
application/pdf |
| dc.publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia Mecânica UTFPR |
| publisher.none.fl_str_mv |
Universidade Tecnológica Federal do Paraná Ponta Grossa Brasil Programa de Pós-Graduação em Engenharia Mecânica UTFPR |
| dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) instname:Universidade Tecnológica Federal do Paraná (UTFPR) instacron:UTFPR |
| instname_str |
Universidade Tecnológica Federal do Paraná (UTFPR) |
| instacron_str |
UTFPR |
| institution |
UTFPR |
| reponame_str |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| collection |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) |
| repository.name.fl_str_mv |
Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR) |
| repository.mail.fl_str_mv |
riut@utfpr.edu.br || sibi@utfpr.edu.br |
| _version_ |
1850498318238482432 |