Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718

Detalhes bibliográficos
Ano de defesa: 2025
Autor(a) principal: Quadros, Pedro Victorio Caetano Abrantes de
Orientador(a): Não Informado pela instituição
Banca de defesa: Não Informado pela instituição
Tipo de documento: Dissertação
Tipo de acesso: Acesso aberto
Idioma: por
Instituição de defesa: Universidade Tecnológica Federal do Paraná
Curitiba
Brasil
Programa de Pós-Graduação em Engenharia Mecânica e de Materiais
UTFPR
Programa de Pós-Graduação: Não Informado pela instituição
Departamento: Não Informado pela instituição
País: Não Informado pela instituição
Palavras-chave em Português:
Link de acesso: http://repositorio.utfpr.edu.br/jspui/handle/1/39328
Resumo: The nickel-based superalloy Inconel 718, employed in the petrochemical industry due to its high mechanical strength and corrosion resistance, may have its applicability limited under specific operating conditions because it exhibits low wear resistance in the single-aged condition. This limitation is particularly relevant in offshore oil and gas production, where the alloy is subjected to tribocorrosion. Consequently, treatments such as double aging or plasma nitriding have emerged as effective approaches to overcome these drawbacks. However, the literature still shows a scarcity of studies addressing the tribocorrosion behavior of plasma-nitrided Inconel 718. In this context, the present work aimed to analyze the effect of double aging and low-temperature plasma nitriding on the tribocorrosion resistance of the Inconel 718 alloy. The material was subjected to microstructural, topographical, mechanical, and triboelectrochemical characterizations. Optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) were employed to analyze the microstructure, as well as the corrosion and wear mechanisms, after the triboelectrochemical tests. Optical interferometry was used to evaluate surface roughness, topography, and the volume of material removed during the triboelectrochemical experiments. Vickers microhardness measurements were conducted to quantify the hardness increase induced by double aging and plasma nitriding. In addition, cathodic polarization, open-circuit potential (OCP), and linear polarization resistance (LPR) tests were performed in a reciprocating ball-on-flat sliding system, all in a saline medium (3.56% NaCl), to determine material loss rates due to pure corrosion, pure wear, tribocorrosion, and the synergistic effect. Furthermore, the predominant factor governing the material loss rate under tribocorrosion conditions was identified. The main results indicated that plasma nitriding led to the formation of nitrided layers composed of γN and CrN phases, with similar thicknesses and hardness values, regardless of the thermal treatment applied prior to nitriding. Low-temperature plasma-nitrided conditions exhibited similar pure corrosion rates, higher hardness, higher corrosion potentials, and improved behavior under cathodic polarization compared with the non-nitrided material. Conversely, the condition nitrided from a single-aged substrate tended to result in higher material loss due to tribocorrosion, which was attributed to layer delamination and a pronounced synergistic effect, where corrosion was identified as the predominant factor accelerating alloy degradation. Therefore, the combined double-aging and plasma-nitriding treatment proved to be the most effective in protecting Inconel 718, as it did not exhibit cracking or delamination on the wear tracks after tribocorrosion testing, showed greater recovery in polarization resistance after tribocorrosion, and demonstrated a tendency toward lower pure wear under cathodic protection conditions.
id UTFPR-12_8cc662b292ff93fef6528e3cf8131e7a
oai_identifier_str oai:repositorio.utfpr.edu.br:1/39328
network_acronym_str UTFPR-12
network_name_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository_id_str
spelling Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718Effect of double aging and low temperature plasma nitriding on the tribocorrosion of inconel 718Ligas de níquel - Tratamento térmicoNitruraçãoTribocorrosãoSuperfícies (Tecnologia)Desgaste mecânicoMetais - BiodegradaçãoIndústria petroquímicaNickel alloys - Heat treatmentNitridingTribo-corrosionSurfaces (Technology)Mechanical wearMetals - BiodegradationPetroleum chemicals industryCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAEngenharia MecânicaThe nickel-based superalloy Inconel 718, employed in the petrochemical industry due to its high mechanical strength and corrosion resistance, may have its applicability limited under specific operating conditions because it exhibits low wear resistance in the single-aged condition. This limitation is particularly relevant in offshore oil and gas production, where the alloy is subjected to tribocorrosion. Consequently, treatments such as double aging or plasma nitriding have emerged as effective approaches to overcome these drawbacks. However, the literature still shows a scarcity of studies addressing the tribocorrosion behavior of plasma-nitrided Inconel 718. In this context, the present work aimed to analyze the effect of double aging and low-temperature plasma nitriding on the tribocorrosion resistance of the Inconel 718 alloy. The material was subjected to microstructural, topographical, mechanical, and triboelectrochemical characterizations. Optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) were employed to analyze the microstructure, as well as the corrosion and wear mechanisms, after the triboelectrochemical tests. Optical interferometry was used to evaluate surface roughness, topography, and the volume of material removed during the triboelectrochemical experiments. Vickers microhardness measurements were conducted to quantify the hardness increase induced by double aging and plasma nitriding. In addition, cathodic polarization, open-circuit potential (OCP), and linear polarization resistance (LPR) tests were performed in a reciprocating ball-on-flat sliding system, all in a saline medium (3.56% NaCl), to determine material loss rates due to pure corrosion, pure wear, tribocorrosion, and the synergistic effect. Furthermore, the predominant factor governing the material loss rate under tribocorrosion conditions was identified. The main results indicated that plasma nitriding led to the formation of nitrided layers composed of γN and CrN phases, with similar thicknesses and hardness values, regardless of the thermal treatment applied prior to nitriding. Low-temperature plasma-nitrided conditions exhibited similar pure corrosion rates, higher hardness, higher corrosion potentials, and improved behavior under cathodic polarization compared with the non-nitrided material. Conversely, the condition nitrided from a single-aged substrate tended to result in higher material loss due to tribocorrosion, which was attributed to layer delamination and a pronounced synergistic effect, where corrosion was identified as the predominant factor accelerating alloy degradation. Therefore, the combined double-aging and plasma-nitriding treatment proved to be the most effective in protecting Inconel 718, as it did not exhibit cracking or delamination on the wear tracks after tribocorrosion testing, showed greater recovery in polarization resistance after tribocorrosion, and demonstrated a tendency toward lower pure wear under cathodic protection conditions.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)A superliga de níquel Inconel 718, aplicada na indústria petroquímica por sua alta resistência mecânica e à corrosão, pode ter sua aplicação limitada em contextos específicos de operação por apresentar baixa resistência ao desgaste em sua condição envelhecido somente uma vez, como na produção de óleo e gás offshore, situações nas quais ela está sujeita à tribocorrosão. Desse modo, tratamentos como o duplo envelhecimento ou a nitretação por plasma têm se destacado como uma solução eficaz para superar essas limitações. Contudo, observa-se uma escassez na literatura sobre o estudo do comportamento frente a tribocorrosão do Inconel 718 nitretado por plasma. Nesse sentido, o presente trabalho teve como objetivo a análise do efeito do duplo envelhecimento e da nitretação por plasma em baixa temperatura na resistência à tribocorrosão da liga Inconel 718. O material foi submetido a caracterizações microestrutural, topográfica, mecânica e triboeletroquímica. Para isso, foi utilizada microscopia óptica (MO) e eletrônica de varredura (MEV), espectroscopia por dispersão de raios X em energia (EDS) e difração de raios X (DRX) para análise da microestrutura e dos mecanismos de corrosão e de desgaste após os ensaios triboeletroquímicos. Interferometria óptica foi empregada para avaliação da rugosidade, topografia e volume removido durante os ensaios triboeletroquímicos. Microdureza Vickers foi adotada para medir o aumento de dureza ocasionado pelo duplo envelhecimento e nitretação. Além disso, foram conduzidos ensaios de polarização catódica, potencial de circuito aberto (OCP) e de resistência à polarização linear (RPL) em sistema deslizante do tipo esfera sobre plano em movimento recíproco, todos em meio salino (NaCl 3,56%), para análise das taxas de perda de material por corrosão pura, desgaste puro, tribocorrosão e efeito sinérgico. Adicionalmente, foi definido o fator predominante na taxa de perda de material sob tribocorrosão. Os principais resultados apontaram que a nitretação levou à formação de camadas nitretadas compostas pelas fases γN e CrN de espessuras e durezas semelhantes, independentemente do tratamento térmico prévio à nitretação. As condições nitretadas por plasma em baixa temperatura apresentaram taxa de corrosão pura semelhante, maior dureza, potenciais de corrosão mais nobres e melhor comportamento sob polarização catódica em comparação com o material não nitretado. Por outro lado, a condição nitretada a partir de um substrato envelhecido somente uma vez exibiu tendência de maior perda de material por tribocorrosão em função de delaminação da camada e do efeito sinérgico, em que a corrosão se mostrou como fator predominante na aceleração da degradação da liga. Desse modo, o tratamento de duplo envelhecimento e nitretação foi aquele que mostrou ser o mais eficiente na proteção do Inconel 718, por não ter apresentado trincas e delaminação nas pistas de deslizamento após os testes tribocorrosão, exibir maior recuperação na resistência à polarização após ensaio de tribocorrosão, além de evidenciar uma tendência de menor desgaste puro em condições de proteção catódica.Universidade Tecnológica Federal do ParanáCuritibaBrasilPrograma de Pós-Graduação em Engenharia Mecânica e de MateriaisUTFPRBorges, Paulo Césarhttps://orcid.org/0000-0002-9622-6412https://lattes.cnpq.br/2389356434049800Palma Calabokis, Orianahttps://orcid.org/0000-0003-0346-2609https://lattes.cnpq.br/8046215519770698Magalhães, Alvaro Augusto Oliveirahttps://orcid.org/0000-0002-6436-0633http://lattes.cnpq.br/5647758590050669Mafra, Márciohttp://orcid.org/0000-0002-5866-6863https://lattes.cnpq.br/1904416043413655Borges, Paulo Cesarhttps://orcid.org/0000-0002-9622-6412https://lattes.cnpq.br/2389356434049800Núñez de La Rosa, Yamid Enriquehttps://orcid.org/0000-0002-9879-8270https://lattes.cnpq.br/7878750253592488Quadros, Pedro Victorio Caetano Abrantes de2026-02-04T16:57:01Z2026-02-04T16:57:01Z2025-12-16info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfQUADROS, Pedro Victorio Caetano Abrantes de. Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718. 2026. Dissertação (Mestrado em Engenharia Mecânica e de Materiais) - Universidade Tecnológica Federal do Paraná, Curitiba, 2025.http://repositorio.utfpr.edu.br/jspui/handle/1/39328porhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessreponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))instname:Universidade Tecnológica Federal do Paraná (UTFPR)instacron:UTFPR2026-02-05T06:31:19Zoai:repositorio.utfpr.edu.br:1/39328Repositório InstitucionalPUBhttp://repositorio.utfpr.edu.br:8080/oai/requestriut@utfpr.edu.br || sibi@utfpr.edu.bropendoar:2026-02-05T06:31:19Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)false
dc.title.none.fl_str_mv Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
Effect of double aging and low temperature plasma nitriding on the tribocorrosion of inconel 718
title Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
spellingShingle Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
Quadros, Pedro Victorio Caetano Abrantes de
Ligas de níquel - Tratamento térmico
Nitruração
Tribocorrosão
Superfícies (Tecnologia)
Desgaste mecânico
Metais - Biodegradação
Indústria petroquímica
Nickel alloys - Heat treatment
Nitriding
Tribo-corrosion
Surfaces (Technology)
Mechanical wear
Metals - Biodegradation
Petroleum chemicals industry
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
Engenharia Mecânica
title_short Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
title_full Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
title_fullStr Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
title_full_unstemmed Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
title_sort Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718
author Quadros, Pedro Victorio Caetano Abrantes de
author_facet Quadros, Pedro Victorio Caetano Abrantes de
author_role author
dc.contributor.none.fl_str_mv Borges, Paulo César
https://orcid.org/0000-0002-9622-6412
https://lattes.cnpq.br/2389356434049800
Palma Calabokis, Oriana
https://orcid.org/0000-0003-0346-2609
https://lattes.cnpq.br/8046215519770698
Magalhães, Alvaro Augusto Oliveira
https://orcid.org/0000-0002-6436-0633
http://lattes.cnpq.br/5647758590050669
Mafra, Márcio
http://orcid.org/0000-0002-5866-6863
https://lattes.cnpq.br/1904416043413655
Borges, Paulo Cesar
https://orcid.org/0000-0002-9622-6412
https://lattes.cnpq.br/2389356434049800
Núñez de La Rosa, Yamid Enrique
https://orcid.org/0000-0002-9879-8270
https://lattes.cnpq.br/7878750253592488
dc.contributor.author.fl_str_mv Quadros, Pedro Victorio Caetano Abrantes de
dc.subject.por.fl_str_mv Ligas de níquel - Tratamento térmico
Nitruração
Tribocorrosão
Superfícies (Tecnologia)
Desgaste mecânico
Metais - Biodegradação
Indústria petroquímica
Nickel alloys - Heat treatment
Nitriding
Tribo-corrosion
Surfaces (Technology)
Mechanical wear
Metals - Biodegradation
Petroleum chemicals industry
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
Engenharia Mecânica
topic Ligas de níquel - Tratamento térmico
Nitruração
Tribocorrosão
Superfícies (Tecnologia)
Desgaste mecânico
Metais - Biodegradação
Indústria petroquímica
Nickel alloys - Heat treatment
Nitriding
Tribo-corrosion
Surfaces (Technology)
Mechanical wear
Metals - Biodegradation
Petroleum chemicals industry
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
Engenharia Mecânica
description The nickel-based superalloy Inconel 718, employed in the petrochemical industry due to its high mechanical strength and corrosion resistance, may have its applicability limited under specific operating conditions because it exhibits low wear resistance in the single-aged condition. This limitation is particularly relevant in offshore oil and gas production, where the alloy is subjected to tribocorrosion. Consequently, treatments such as double aging or plasma nitriding have emerged as effective approaches to overcome these drawbacks. However, the literature still shows a scarcity of studies addressing the tribocorrosion behavior of plasma-nitrided Inconel 718. In this context, the present work aimed to analyze the effect of double aging and low-temperature plasma nitriding on the tribocorrosion resistance of the Inconel 718 alloy. The material was subjected to microstructural, topographical, mechanical, and triboelectrochemical characterizations. Optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) were employed to analyze the microstructure, as well as the corrosion and wear mechanisms, after the triboelectrochemical tests. Optical interferometry was used to evaluate surface roughness, topography, and the volume of material removed during the triboelectrochemical experiments. Vickers microhardness measurements were conducted to quantify the hardness increase induced by double aging and plasma nitriding. In addition, cathodic polarization, open-circuit potential (OCP), and linear polarization resistance (LPR) tests were performed in a reciprocating ball-on-flat sliding system, all in a saline medium (3.56% NaCl), to determine material loss rates due to pure corrosion, pure wear, tribocorrosion, and the synergistic effect. Furthermore, the predominant factor governing the material loss rate under tribocorrosion conditions was identified. The main results indicated that plasma nitriding led to the formation of nitrided layers composed of γN and CrN phases, with similar thicknesses and hardness values, regardless of the thermal treatment applied prior to nitriding. Low-temperature plasma-nitrided conditions exhibited similar pure corrosion rates, higher hardness, higher corrosion potentials, and improved behavior under cathodic polarization compared with the non-nitrided material. Conversely, the condition nitrided from a single-aged substrate tended to result in higher material loss due to tribocorrosion, which was attributed to layer delamination and a pronounced synergistic effect, where corrosion was identified as the predominant factor accelerating alloy degradation. Therefore, the combined double-aging and plasma-nitriding treatment proved to be the most effective in protecting Inconel 718, as it did not exhibit cracking or delamination on the wear tracks after tribocorrosion testing, showed greater recovery in polarization resistance after tribocorrosion, and demonstrated a tendency toward lower pure wear under cathodic protection conditions.
publishDate 2025
dc.date.none.fl_str_mv 2025-12-16
2026-02-04T16:57:01Z
2026-02-04T16:57:01Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv QUADROS, Pedro Victorio Caetano Abrantes de. Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718. 2026. Dissertação (Mestrado em Engenharia Mecânica e de Materiais) - Universidade Tecnológica Federal do Paraná, Curitiba, 2025.
http://repositorio.utfpr.edu.br/jspui/handle/1/39328
identifier_str_mv QUADROS, Pedro Victorio Caetano Abrantes de. Efeito do duplo envelhecimento e nitretação por plasma em baixa temperatura na tribocorrosão do inconel 718. 2026. Dissertação (Mestrado em Engenharia Mecânica e de Materiais) - Universidade Tecnológica Federal do Paraná, Curitiba, 2025.
url http://repositorio.utfpr.edu.br/jspui/handle/1/39328
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv http://creativecommons.org/licenses/by-nc-nd/4.0/
info:eu-repo/semantics/openAccess
rights_invalid_str_mv http://creativecommons.org/licenses/by-nc-nd/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Brasil
Programa de Pós-Graduação em Engenharia Mecânica e de Materiais
UTFPR
publisher.none.fl_str_mv Universidade Tecnológica Federal do Paraná
Curitiba
Brasil
Programa de Pós-Graduação em Engenharia Mecânica e de Materiais
UTFPR
dc.source.none.fl_str_mv reponame:Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
instname:Universidade Tecnológica Federal do Paraná (UTFPR)
instacron:UTFPR
instname_str Universidade Tecnológica Federal do Paraná (UTFPR)
instacron_str UTFPR
institution UTFPR
reponame_str Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
collection Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT))
repository.name.fl_str_mv Repositório Institucional da UTFPR (da Universidade Tecnológica Federal do Paraná (RIUT)) - Universidade Tecnológica Federal do Paraná (UTFPR)
repository.mail.fl_str_mv riut@utfpr.edu.br || sibi@utfpr.edu.br
_version_ 1879057194482139136